www.archive-pt-2014.com » PT » I » IT

Choose link from "Titles, links and description words view":

Or switch to "Titles and links view".

    Archived pages: 20 . Archive date: 2014-10.

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: .. Welcome to Lisbon,.. Portugal.. Congress Photos.. Report from the Chairmen.. Optimized for FIrefox 2 and Internet Explorer 7 at 1024x768 or higher resolution..

    Original link path: /
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Pedro Silva Girão.. (Instituto Superior Técnico/Instituto de Telecomunicações – Portugal).. General Chairman.. As General Chairman of the IMEKO XIX World Congress it is an honour and a privilege to welcome you to Lisbon, capital of Portugal, the western continental European country that in, the 15th century, gave new worlds to the World.. The theme chosen for the Congress is “Fundamental and Applied Metrology”.. By choosing this theme, the organization wants to stress the importance of both Fundamental Metrology, which encompasses the bases of Metrology, and all the Metrology aspects more closely related to applications.. More than ever, everyday life and trade rely and depend on the development of state-of-the-art technological-based metrology.. The theme is clearly broad and opens the possibility of participating to all people working in Metrology coming either from academia or industry, from scientists to engineers, from mathematicians to chemists and physicists, from instrumentation designers to measuring techniques developers.. The emphasis on Fundamental and Applied Metrology is also present in the subjects of the five invited talks that we hope will constitute hallmarks of the IMEKO XIX World Congress.. The Programme Committee and the Organizing Committee did their best to put-up a Congress at least as successful as the previous ones, namely of the 2006 XVIII World Congress in Rio de Janeiro, Brazil.. Special attention was paid to the reviewing process in order to maintain and try to increase the quality of the accepted papers and, thus, of the Congress.. I do hope that such goal was achieved and that we were able to further contribute to the continued effort of reaching excellence in IMEKO events.. It is my special pleasure to host this IMEKO XIX World Congress for you.. I hope  ...   and expertise.. Overall, 694 papers from 48 countries were originally submitted.. Of these, 610 were accepted, 34 were rejected and 50 were conditionally accepted pending a second review of the final paper.. In the end, 551 accepted full papers were received for publication.. The Congress program is divided into oral and poster sessions with 389 papers to be presented in the oral sessions and 162 in poster sessions.. In addition to the regularly submitted papers, five invited speakers were selected.. Their presentations cover different topics in metrology, instrumentation and measurement.. Proposed by the TC chairmen, four workshops are included in the program.. The topics include the new definition of the kilogram, the VIM, analog-to-digital converters and on measuring the impossible – measurement of characteristics related to human perception and interpretation.. Round tables on the VIM, on continuous and dynamic calibration in force and torque, on traceability in chemistry, health, food and nutrition and on higher education in the 21st century are also included in the Congress program.. I hope you find this final program, rich and diverse as is the tradition of IMEKO.. To complement the technical program and to underline the strong connection between IMEKO and industries, an exhibition is also present in the halls of the congress centre.. Although the Organizing Committee hoped for a larger number of exhibitors, the worldwide economic situation has forced many companies to reduce their budgets which has prevented their participation in the Congress.. Nevertheless, we must thank all the exhibitors who showed their confidence in the organization and whose participation, we believe, will help make this Congress a success.. Finally, I must thank the members of the Organizing Committee for their contribution in the Congress Organization..

    Original link path: /greetings.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: LISBOA.. Most likely founded by the Phoenicians, styled by the Moors and certainly enriched by the spice trade in the golden age of its oversea empire, Lisboa is a historic capital, a potpourri of unusual character and charm, an amalgam of 800 years of cultural influences mingle with modern trends and life style creating intricate and spectacular contrasts.. Spread across seven hills always opening a window towards the majestic Tagus river, Lisboa invites you.. GENERAL INFORMATION.. * Accessibility.. Lisboa International Airport located 6 kms.. from the city centre, and about 20/30 minutes driving from Estoril, is served by all major international airlines from all over the world.. * Check in/out Policy.. Should hotel rooms be required for guaranteed occupancy before 13.. 00 hrs, the previous night should be reserved.. Check out time is 12.. 00 hrs.. noon.. * Climate.. The climate, through its effect on vegetation, divides Portugal.. Such as in Spain, three sets of influences are involved: Atlantic, continental and Mediterranean.. The former predominates overall, putting most of the country into the humid zone of the Iberian Peninsula, but is especially true in the Northwest, where it gives a mild, rainy climate.. The maritime winds certainly influence Portugal, especially through its long 700 km coastline.. As long as we move away from the coast, the humidity diminishes, the interior areas being quite 'fair', with the exception of the Tagus North valley, where the climate is wet and soft.. The Northern region benefits from the Atlantic cyclones, while South and East are dominated by the subtropical anticyclone, that allows temperatures to rise up to 40º C during the Summer.. The climate varies according to the altitude and the highest temperatures are more likely in the lower regions of the South.. Lisboa has a warm climate, with sunny spring and summer days when temperatures frequently reach 85ºF (30ºC) or above.. Winters are wet and windy, temperatures averaging around 50ºF (10ºC).. In September the minimum average temperature is 17 ºC, the maximum average temperature is 26 ºC and the rainfall is usually below 30 mm (1.. 2 inches).. 10 day Forecast.. Average Temperature and Rainfall.. * Currency.. As a member of the European Monetary System, since the 1st of January 2002, the local currency Escudo was replaced by the Euro.. * Driving.. Vehicles drive on the right side of the road.. The use of safety belts is compulsory, and children under 12 must ride in the back seats.. Portugal has a large freeway network crossing the whole country from the North to the South in Algarve, and from the Ocean front to the border with Spain.. Valid driving licenses from EU countries, the USA, Canada and other major countries are acceptable for use in Portugal up to 6 months stay.. * Electric Current.. European type 2 pin sockets with 230 volts AC at 50 cycles are used.. The phase 380 volt current is normally available in meeting and exhibition rooms.. * Entertainment.. Lisboa has a variety of theatres and venues catering for most tastes.. Opera, ballet, plays, concerts, etc.. take place  ...   at out-patient departments, otherwise private consultation fees are charged.. * Museums.. Most of the Museums are open Tuesdays to Sundays, from 10h00 to 17h00, closed on Mondays and public holidays.. Please check with the Secretariat of the Congress for further information.. * Passport and Visas.. A valid passport (or identity card for European Community nationals) is required.. Visas are not necessary for citizens of EU countries, the U.. S.. A.. , Canada and the majority of countries.. Please contact your local Portuguese Embassy, Consulate or your Travel Agency for further information.. * Post and Telecommunications.. Automatic direct dial telephone service is available to and from most countries in the world.. Public phones accept either a pre-paid card, or coins (see signs on the booth).. Credit systems such as AT T are also available.. Post offices are open Monday to Friday from 08h30 to 12h00 and 14h00 to 18h00.. * Public Transportation.. There is a wide inexpensive network in all towns and cities.. In Lisboa, city of the seven hills, you can choose between bus, underground metro, elevators, electric trams or railway, within the city or to the suburbs.. Trains and express bus service also link the main towns of the country.. * Recreation.. Excellent golf courses, tennis and squash courts, water sports and horse riding tempt the energetic delegates.. There are also many noteworthy museums and monuments, sunny beaches to explore.. * Religious Services.. Portugal is predominantly Catholic, but a wide number of other religions (Protestant, Christian, Moslem, Jewish, and Hindu, among others) are also represented.. Please inquire at hotel reception for times and places of services.. * Sales Tax.. Sales tax (VAT) is included in prices quoted.. For non E.. U.. residents, tax free shopping schemes are available in many shops, which gives substantial savings to visitors.. * Security.. Crime rates in Portugal are among the lowest in the world.. Hotels have their own security staff, which is sufficient for most events.. Specialist firms are also available if necessary, and the police provide special protection for visiting dignitaries and high risk individuals.. * Shops.. Shops are open from 09h00 to 13h00 and 15h00 to 19h00 Monday to Friday, and 09h00 to 13h00 on Saturdays.. In major town centres and in many shopping malls, they stay open during lunch hours, and close later at night, including weekend Fine leather goods, lead crystal ware, porcelain, vintage wines, golden and silver filigree, pottery and specialist textiles are considered excellent buys in Portugal.. * Shopping Areas.. The city centre, “a Baixa”, bordered by the magnificent Praça do Comércio (Black Horse Square) facing the river Tejo, the Rua do Ouro, Rua Augusta and Rua da Prata finishing at Rossio Square, Avenida da Liberdade, and the Chiado leading to Bairro Alto.. Some of the main Shopping Centres are Colombo (one of the biggest in Europe), Amoreiras, Vasco da Gama , Monumental and the Atrium Saldanha.. * Smoking.. Smoking is forbidden by law in public transportation, and in closed public areas.. * Tipping.. Tipping is optional, but normally 10% is customary in taxis, restaurants and bars..

    Original link path: /lisbon.php
    Open archive
  •  

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Venue.. The XIX IMEKO World Congress will take place on the river banks of the Tagus river on the site of World Expo 98.. The Venue is the.. FIL Meeting Centre.. FIL Meeting Centre has a unique view near River Tagus and an architectonic beauty that lends the Meeting Centre very particular and modern characteristics, unique in the city of Lisbon.. Only 7 minutes away from Lisbon International airport and 20 minutes from downtown, the FIL Meeting Centre benefits with the Parque  ...   Centre Website.. View Larger Map.. Venue and Airport location.. Walking directions from Oriente underground station to the conference location.. Floor Plans.. Local Photos.. Venue location.. Venue with Pavilhão Atlântico.. Pavilhão Atlântico.. Pavilhão Atlântico.. Promenade in Parque das Nações.. Promenade and Pav.. Atlântico.. Vasco da Gama Tower.. Parque das Nações.. Vasco da Gama Bridge.. Cable Car.. Portugal Pavilion.. Portugal Pavilion.. Parque das Nações.. Promenade.. Promenade and Cable Car.. Oceanarium.. Restaurants in Parque das Nações.. Oceanarium and Cable Car.. Venue location.. Promenade and Cable Car..

    Original link path: /venue.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Committees.. Congress Chairman.. (Instituto Superior Técnico/Instituto de Telecomunicações - Portugal).. Local Organizing Committee.. Pedro Miguel Ramos.. Instituto Superior Técnico/Instituto de Telecomunicações.. Vice-Chair.. Fernando Janeiro.. Universidade de Évora/Instituto de Telecomunicações.. Webserver co-chair.. Raul Carneiro Martins.. Francisco Alegria.. Publications chair.. Eduarda Filipe.. Instituto Português da Qualidade.. José Dias Pereira.. Escola Superior de Tecnologia do Instituto Politécnico de Setúbal/Instituto de Telecomunicações.. Octavian Postolache.. Helena Geirinhas Ramos.. Artur Lopes Ribeiro.. Manuel Fonseca da Silva.. Instituto de Telecomunicações.. International Program Committee.. G.. Bahng (Rep.. of Korea).. L.. van Biesen (Belgium).. P.. de Bièvre (Belgium).. Borbás (Hungary).. M.. Boršić (Croatia).. H.. S.. Brandi (Brazil).. T.. Bruns  ...   Eugene (Belgium).. Ferrero (Italy).. Girão (Portugal).. V.. Haasz (Czech Republic).. K.. Hariri (Germany).. Herrmann (Germany).. Ito (Japan).. V.. Iyengar (USA).. Kaarls (Netherlands).. Kahn (UK).. Dae-Im Kang (Rep.. von Klitzing (Germany).. Kneppo (Czech Republic).. I.. Kollar (Hungary).. Kumme (Germany).. Laopoulos (Greece).. Lazaro (Spain).. Lee (USA).. Mari (Italy).. Monostori (Hungary).. Z.. Morawski (Poland).. Osanna (Austria).. Ottoboni (Italy).. F.. Pavese (Italy).. Peters (Germany).. E.. Petriu (Canada).. Pfeifer (Germany).. Piuri (Italy).. Pusa (Finland).. Reader-Harris (UK).. Regtien (Netherlands).. Renaud (Switzerland).. Righini (Italy).. Sachenko (Ukraine).. D.. Santos (Portugal).. Savino (Italy).. Serra (Portugal).. Singh (India).. Stefanescu (Romania).. Tachi (Japan).. Torres Guzmán (Mexico).. Wallard (UK).. Webster (USA).. Weckenmann (Germany)..

    Original link path: /committee.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Call for Papers.. The XIX IMEKO World Congress will be held in the beautiful city of Lisbon, Portugal from September 6, through September 11, 2009.. Contributions are invited for presentation on subjects within the topics of the congress.. Authors should submit extended summaries in PDF format with no more than 4 pages in A4 paper.. It should clearly indicate the originality of the contribution and relevance of the work and include title, author names and affiliations, abstract, keywords, introduction describing the nature of the problem and the state of the art in the field of interest, description of the contribution, results achieved and their applicability, conclusions and references..  ...   Instrumentation.. TC2 - Photonics.. TC3 - Measurement of Force, Mass and Torque.. TC4 - Measurement of Electrical Quantities.. TC5 - Hardness Measurement.. TC7 - Measurement Science.. TC8 - Traceability in Metrology.. TC9 - Flow Measurement.. TC10 - Technical Diagnostics.. TC11 - Metrological Infrastructures.. TC12 - Temperature and Thermal Measurements.. TC13 - Measurements in Biology and Medicine.. TC14 -.. Measurement.. of Geometrical Quantities.. TC15 - Experimental Mechanics.. TC16 - Pressure and Vacuum.. s.. TC17 -.. in Robotics.. TC18 -.. of Human Functions.. TC19 - Environmental.. TC20 -.. Techniques for the Construction Industry.. TC21 - Mathematical Tools for.. TC22 - Vibration.. TC23 - Metrology in Food and Nutrition.. TC24 - Chemical..

    Original link path: /call.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Author Guidelines.. György.. Striker Junior Paper Award.. Donated by the Founding Secretary General of the International Measurement Confederation, Professor György Striker and his wife, Barbara.. Since 1994 the Award (USD 2 000) will be given at the Closing Session of a World Congress to one junior author below the age of 35 years, whose paper reflects a deep understanding knowledge of the Congress theme, describing a novelty in technology or application.. The author must be the presenter of the paper and the final decision will be taken by the committee specially nominated for the purpose.. Candidates should fill out the following form (.. PDF.. ,.. WORD.. ) and return it,.. SIGNED.. , in.. format.. The György Striker Junior Paper Award was given, at the IMEKO World Congress 2009 Closing Session in Lisbon, to.. Ryota Kudo.. from Japan, based on the paper entitled.. Fundamental Verification For 2-Dimensional Super-Resolution Optical Inspection For Semiconductor Defects By Using Standing Wave Illumination Shift.. Born on November 21, 1981 in Fukuoka, Japan.. Study of Precision Engineering at The University of Tokyo, 2006 diploma work “Analysis of scattered light form from minute object”.. 2008 M.. Sc.. work “Development of experimental apparatus for two-dimensional super-resolution by using standing wave illumination shift”.. 2009 György Striker Junior Paper Award for the paper R.. Kudo, S.. Usuki, S.. Takahashi, and K.. Takamasu: Fundamental Verification for 2-Dimensional Super- Resolution Optical Inspection for Semiconductor Defects by Using Standing Wave Illumination Shift.. Presentation Instructions.. Authors must fill out the.. SPEAKER BIO form.. , print it, bring it to Lisbon and deliver it to your session co-chairs before the session start.. Oral Presentations.. Each oral presentation consists of 15 minutes for presentation by the author.. After this time, there will be 5 minutes for questions and answers coordinated by the session co-chairs.. The acceptable formats for presentations are MS PowerPoint and Adobe PDF.. Each room will be equipped with one PC connected to an LCD projector.. Each author must bring their presentation in USB memory device and upload the presentation into the PC.. BEFORE.. the start of the corresponding session.. In each room there will be a Congress assistant to help with the presentation upload.. In the presentation itself, try not to overcrowd each slide with text and graphics.. Do not read full text off the presentation.. Use fonts larger than 20 point so the text is  ...   3).. What are the languages in which the final paper should be written?.. The final paper.. must.. be written in.. English.. 4).. Is there a Tex template or example available?.. We are sorry but, a Tex template is not available and will not be available for the final submission.. However, the instructions within the doc and pdf should be enough to format your Tex.. 5).. I have prepared my paper in Word (or other program) but can't convert it to PDF.. Should I just change the file extension to PDF?.. No.. There are many free tools available to convert your document to PDF on the web, so please use one of them.. One online free converter can be found at.. http://www.. doc2pdf.. net/converter/.. 6).. What is the format for the final paper?.. See the instructions above.. 7).. What should the final paper include?.. The final paper should clearly define your problem, the approach used, simulation and or measurement results, conclusions and references.. It is similar to the submitted extended abstract but with a limit of six pages.. 8).. Does my final paper need to be six pages long?.. However, this maximum length is to assure that the final papers have a sufficient level of detail.. 9).. I have an accepted extended abstract to the IMEKO World Congress.. However, I am unable to submit the final paper by June 22nd.. Will there be a deadline extension?.. 10).. I have uploaded the final paper, but I wish to change the PDF file.. Can I send the file by email?.. 11).. Is it necessary to answer the reviewers comments, or do we only have only to consider them for the full paper?.. Authors only need to address the issues raised by the reviewers when preparing the full paper.. Do not.. include a letter addressing the reviewers comments.. 12).. Can I update my submission details (e.. g.. , change the abstract) without uploading the paper?.. 13).. Where do I upload the final paper?.. 14).. I want to plan my travel to Lisbon for the IMEKO XIX World Congress.. When will the conference program will be available?.. We are in the progress of preparing the schedule.. However we will only be able to complete it after final paper submission to ensure presence of oral paper presenters.. You can count on 5 full days of Congress (Monday through Friday)..

    Original link path: /guidelines.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Important Dates.. 2009 Lisbon World Congress Dates.. Extended abstract submission.. 30 January 2009.. Acceptance notification.. 15 April 2009.. Final submission.. 22 June 2009 - 23:59 GMT (Hard Deadline).. Registration to ensure publication.. 01 July 2009 (Hard Deadline).. Congress.. 6-11 September 2009.. Submission is now CLOSED.. Do NOT send papers by email..

    Original link path: /dates.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Registration.. TO ENSURE PAPER PUBLICATION, AUTHORS MUST REGISTER BEFORE JULY 1ST.. Registration fees.. Early registration fee Before June 1st, 2009.. Late registration fee June 1st to July 30th.. On-site.. Regular Participant.. 500.. 600.. 650 *.. Student.. 300.. 350.. 370 *.. Accompanying Person.. 250.. 320 *.. Extra Paper.. 50.. -.. Students are required to fax a certificate of studentship.. One author registration will guarantee publication of up to two accepted papers.. Each additional accepted paper, with the same registration, requires the additional payment of 50€ per paper.. All participants are welcome at the Reception Party and are entitled to lunch every week day.. Regular participants and accompanying persons are offered entrance to the congress  ...   the Reception Party and the Congress Banquet.. In addition, the accompanying persons can attend all open sessions.. The cultural and tourist program is organized as follows: each accompanying person can select up to.. TWO.. of these tours organized by the Travel Agency.. Tour of Sesimbra, Setúbal, Palmela - Full Day (lunch included) on September 9th, 9:00 am.. Tour of Óbidos, Nazaré, Fátima - Full Day (lunch included) on September 10th, 9:00 am.. Tour of Sintra, Cascais, Estoril - Half Day on September 11th, 9:00 am.. A voucher will be delivered upon check-in at the Congress Desk and then booking is done at the Travel Agency Desk.. Details of the tours can be found..

    Original link path: /registration.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Technical Program.. Program Outline.. Overall Schedule.. Monday, Sept.. 7th.. Tuesday, Sept.. 8th.. Wednesday, Sept.. 9th.. Thursday, Sept.. 10th.. Friday, Sept.. 11th.. 8:30.. TC2 - TC Meeting.. TC3 - Oral Session 6.. TC3 - Oral Session 9.. 9:00.. Opening Ceremony.. TC3 - Oral Session 2.. TC2 - Oral Session 2.. TC4 - Oral Session 10.. TC4 - Oral Session 12.. TC4 - WS ADC Session 1.. TC3 - Oral Session 5.. TC9 - TC Meeting.. TC8 - TC Meeting.. TC7 - Oral Session 1.. TC4 - WS ADC Session 3.. TC12 - Oral Session 2.. TC14 - Oral Session 5.. TC11 - TC Meeting.. TC14 - Oral Session 1.. TC14 - Oral Session 2.. TC21 - Oral Session 4.. TC15 - Oral Session 1.. TC18 - TC Meeting.. TC16 - Oral Session 2.. TC23 - TC Meeting.. TC20 - Oral Session 1.. TC22 - TC Meeting.. TC19 - Oral Session 2.. 9:50.. Coffee Break.. 10:15.. Invited Talk.. 11:00.. WS VIM.. TC1 - Oral Session 1.. RT Traceability in.. RT Higher Education.. TC3 - Oral Session 3.. RT Calibration Force.. TC3 - Oral Session 7.. TC3 - Oral Session 10.. TC4 - WS ADC Session 2.. TC4 - WS ADC Session 4.. TC12 - Oral Session 3.. TC4 - Oral Session 13.. TC5 - Oral Session 1.. TC7 - Oral Session 3.. TC13 - Oral Session 2.. TC8 - Oral Session 1.. TC13 - Oral Session 1.. TC13 - TC Meeting.. TC14 - TC Meeting.. TC21 - Oral Session 5.. 12:00.. TC15 - TC Meeting.. TC18 - Oral Session 1.. TC16 - Oral Session 3.. TC23 - Oral Session 1.. Lunch.. TC20 - TC Meeting.. TC24 - TC Meeting.. 12:20.. 13:40.. WS kilogram.. RT VIM.. TC4 - Oral Session 9.. TC1 - TC Meeting.. WS Measuring the Impossible.. TC4 - Oral Session 1.. TC3 - Oral Session 4.. TC7 - Oral Session 4.. TC3 - Oral Session 8.. TC3 - TC Meeting.. TC4 - Oral Session 2.. TC4 - Oral Session 5.. TC12 - TC Meeting.. TC9 - Oral Session 1.. TC5 - TC Meeting.. TC4 - Oral Session 6.. TC16 - Oral Session 1.. TC13 - Oral Session 3.. TC8 - Oral Session 2.. TC10 - Oral Session 1.. TC5 - Oral Session 2.. TC18 - Oral Session 2.. TC14 - Oral Session 3.. TC13 - Oral Session 5.. TC17 - Oral Session 1.. TC10 - Oral Session 2.. TC22 - Oral Session 1.. TC24 - Oral Session 1.. TC14 - Oral Session 6.. 15:40.. TC21 - Oral Session 1.. TC19 - TC Meeting.. POSTER SESSION.. TC23 - Oral Session 2.. 16:20.. TC3 - Oral Session 1.. TC2 - Oral Session 1.. TC1 - Oral Session 2.. TC4 - Oral Session 11.. Closing Ceremony Presentation of the XX World Congress.. TC4 - Oral Session 3.. TC4 - Oral Session 7.. TC2 - Oral Session 3.. TC7 - TC Meeting.. TC4 - Oral Session 4.. TC4 - Oral Session 8.. TC4 - TC Meeting.. TC9 - Oral Session 2.. TC10 - TC Meeting.. TC7 - Oral Session 2.. TC12 - Oral Session 1.. TC12 - Oral Session 4.. 17:00.. TC11 - Oral Session 1.. TC19 - Oral Session 1.. TC21 - Oral Session 3.. TC13 - Oral Session 4.. TC17 - TC Meeting.. TC16 - TC Meeting.. TC22 - Oral Session 2.. TC14 - Oral Session 4.. 18:20.. TC21 - Oral Session 2.. TC21 - TC Meeting.. Reception Party.. Congress Banquet.. A searchable PDF version of the paper schedule is available.. Workshops.. Workshop.. TC.. Workshop on the VIM.. TC1, TC7, TC21.. 8th, 11:00 - 12:20.. Workshop on New Definition of the kilogram.. TC3.. 7th, 13:40 - 15:40.. Workshop on ADC Testing.. TC4.. Mornings of Tuesday (Sept.. 7th) and Wednesday (Sept.. 8th).. Workshop on Measuring the Impossible:.. Measurement of Characteristics Related to Human Perception and Interpretation.. TC7, TC18.. , TC21.. 11th, 13:40 - 15:40.. Round Tables.. Round Table.. Round Table on the VIM.. 8th, 13:40 - 15:40.. Round Table on Higher Education in 21st Century.. TC1, TC7.. 11th, 11:00 - 12:20.. Round Table on Continuous and Dynamic Calibration in Force and Torque.. 9th, 11:00 - 12:20.. Round Table on Traceability in Chemistry, Health, Food and Nutrition.. TC8, TC23, TC24.. 10th, 11:00 - 12:20.. Detailed Program.. Dowloadable PDF version.. Dowloadable HTML version.. Monday, 13:40 to 15:40 – Infante D.. Henrique Room.. Co-Chairs: Richard Davis, Head, Mass Section, Bureau International des Poids et Mesures, Sèvres, France.. Rolf Kumme, Physikalisch-Technische Bundesanstalt (PTB), Germany.. TC4 Oral Session 1 Monday, 13:40 to 15:40 – Pedro Álvares Cabral Room.. TC4 – Advanced Instrumentation.. Co-Chairs: Helena Ramos, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal.. Christian Eugène, Universite Catholique de Louvain, Belgium.. 13:40 On the Use of Dielectric Spectroscopy for Quality Control of Vegetable Oils.. (363).. Andrea Cataldo, Department of Engineering for Innovation, University of Salento, Italy.. Emanuele Piuzzi, Sapienza University of Rome, Italy.. Giuseppe Cannazza, Dept.. of Engineering for Innovation, University of Salento, Italy.. Egidio De Benedetto, Dept.. Luciano Tarricone, Dept.. 14:00 Weld Testing Using Eddy Current Probes and Image Processing.. (438).. Octavian Postolache, Instituto de Telecomunicações, Portugal.. Artur Lopes Ribeiro, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. Helena Geirinhas Ramos, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. 14:20 New Non-Destructive Test Technique on Metal Inspection.. (461).. Luís Rosado, Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal.. Telmo Santos, IDMEC, DEM, IST, UTL, Portugal.. Moisés Piedade, Instituto Superior Técnico, Universidade Técnica de Lisboa, Portugal.. Ramos, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. Pedro Vilaça, IDMEC, DEM, IST, UTL, Portugal.. 14:40 Requirements of a Mechanical Positioning System for Biological Imaging Using Magnetic Induction Tomography.. (534).. Nuno B.. Brás, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. Martins, IDMEC,IST, Portugal.. Raul C.. Martins, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. Cruz Serra, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. 15:00 CAN Protocol: A Laboratory Prototype for Fieldbus Applications.. (535).. Mário Alves, LabIM/ESTSetúbal, Polytechnic Institute of Setúbal, Portugal.. Dias Pereira, LabIM/ESTSetúbal, Polytechnic Institute of Setúbal/Instituto de Telecomunicações, Portugal.. 15:20 Large Number Library – The New LabVIEW Tool for Secure Measurement Systems.. (206).. Piotr Bobiński, Warsaw University of Technology, Poland.. Wiesław Winiecki, Warsaw University of Technology, Poland.. TC4 Oral Session 2 Monday, 13:40 to 15:40 – Vasco da Gama Room.. TC4 – Software Measurements.. Co-Chairs: Dusan Agrez, University of Ljubljana, Faculty of Electrical Engineering, Slovenia.. Pasquale Arpaia, Dipartimento di Ingegneria - Università degli Studi del Sannio/ CERN European Organization for Nuclear Research, Italy.. 13:40 Multicore Implementation of the AES Algorithm in the Measurement System.. (196).. Piotr Bilski, Warsaw University of Life Sciences, Poland.. Wiesław Winiecki, Warsaw University of Technology, Institute of Radioelectronics, Poland.. 14:00 Software Quality Characterization of the Flexible Framework for Magnetic Measurements at CERN.. (469).. Pasquale Arpaia, Dipartimento di Ingegneria - Università degli Studi del Sannio/CERN, Italy.. Vitaliano Inglese, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II/CERN, Switzerland.. Giuseppe La Commara, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy.. 14:20 A Multi-Touch Collaborative Solution for Measurement Data Visualisation.. (524).. Septimiu Crisan, Dep.. of Electrical Measurement, Fac.. of Electrical Eng.. , Tech.. Univ.. of Cluj-Napoca, Romania.. Valentin Dan Zaharia, Dep.. Leonard Voicu Brender, Dep.. Titus Eduard Crisan, Dep.. 14:40 Design of the Prototype of PLD Auto Test Platform.. (85).. Senzu Shen, Wuhan Digital Engineering Institute, China.. Hua Li, Wuhan Digital Engineering Institute, China.. Zhengle Shi, Wuhan Digital Engineering Institute, China.. Minghu Zhang, Wuhan Digital Engineering Institute, China.. Qian Liu, Wuhan Digital Engineering Institute, China.. 15:00 Automatically-Generated User Interfaces for Measurement Software Frameworks: A Case Study on Magnetic Permability at CERN.. (611).. Marco Buzio, Dept.. of Technology, Group of Magnets Superconductors Cryostats, CERN, Geneva, Italy.. Lucio Fiscarelli, Dipartimento di Ingegneria - Università degli Studi del Sannio/CERN, Italy.. Vitaliano Inglese, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II/CERN, Italy.. TC5 Monday, 13:40 to 15:40 – Fernão Mendes Pinto Room.. TC5 – Meeting.. Meeting of the Technical Committee.. on.. Hardness Measurement.. TC5.. TC10 Oral Session 1 Monday, 13:40 to 15:40 – Bartolomeu Dias Room.. TC10 – Technical Diganostics 1.. Co-Chairs: Janusz Smulko, Gdańsk University of Technology, Poland.. 13:40 Integrated Management System for Testing, Monitoring and Diagnostic of Power Transformer Insulation.. (68).. Dragan Kovacevic, Electrical Engineering Institute Nikola Tesla , Serbia.. Jelena Lukic, Electrical Engineering Institute Nikola Tesla , Serbia.. Dragana Naumovic-Vukovic, Electrical Engineering Institute Nikola Tesla , Serbia.. Slobodan Skundric, Electrical Engineering Institute Nikola Tesla , Serbia.. 14:00 Nondestructive Testing in Diagnostics of High-Voltage Varistors.. (353).. Lech Hasse, Gdańsk University of Technology, Poland.. Janusz Smulko, Faculty of Electronics, Telecommunications and Informatics, Gdańsk Univ.. of Technology, Poland.. 14:20 Automatic Diagnosis of Power Transformers Based on Dissolved Gas Analysis - First Level of Diagnosis using VAC and VSC Inference Methods.. (357).. Mladen Banovic, Croatia.. Josip Butorac, University of Zagreb, Faculty of Electrical Engineering and Computing, Croatia.. 14:40 Automatization of Tampering Identification in Induction Electrical Power Meters.. (454).. Noara Foiatto, PPGEP/UFGRS and LABELO/PUCRS, Brazil.. Christine Tessele Nodari, PPGEP/UFGRS, Brazil.. João Miguel Lac Roehe, FENG/PUCRS, Brazil.. Marcus Vinicius Viegas Pinto, LABELO/PUCRS, Brazil.. 15:00 Remote Monitoring of Incipient Faults Using GPRS in Power Transformers.. (655).. Marco A.. Cavaco, Federal University of Santa Catarina, Brazil.. Mauro Eduardo Benedet, Federal University of Santa Catarina, Brazil.. César A.. Nogueira, Federal University of Santa Catarina, Brazil.. Régis H.. Coelho, Centrais Elétricas de Santa Catarina, Brazil.. TC17 Oral Session 1 Monday, 13:40 to 15:40 – Fernão de Magalhães Room.. TC17 – Measurement in Robotics.. Co-Chairs: Susumu Tachi, The University of Tokyo, Keio University, Japan.. 13:40 Positioning Accuracy of Non-Conventional Production Machines.. (485).. Ľudovít Kolláth, Slovak University of Technology, Faculty of Mechanical Engineering, Slovakia.. Martin Halaj, Slovak University of Technology, Faculty of Mechanical Engineering, Slovakia.. Eva Kureková, Slovak University of Technology, Faculty of Mechanical Engineering, Slovakia.. 14:00 SIFT-Based Measurements for Vehicle Model Recognition.. (9).. Apostolos Psyllos, Electrical and Computer Engineering School, National Technical University of Athens, Greece.. Christos Anagnostopoulos, Cultural Technology Communication Department, University of the Aegean, Greece.. Eleftherios Kayafas, Electrical and Computer Engineering School, National Technical University of Athens, Greece.. 14:20 Mobile Robot Localization from Landmark Bearings.. (84).. Toshifumi Tsukiyama, Tokyo Denki University, Japan.. TC21 Oral Session 1 Monday, 13:40 to 15:40 – Luís Vaz de Camões Room.. TC21 – Dynamical Measurements.. Co-Chairs: Clemens Elster, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden.. 13:40 Analysis of Dynamic Measurements: New Challenges Require New Solutions.. (211).. Trevor Esward, National Physical Laboratory, United Kingdom.. Clemens Elster, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Jan Peter Hessling, SP Technical Research Institute of Sweden, Sweden.. 14:00 Uncertainty Evaluation of Dynamic Measurements in Line with the GUM.. (57).. Sascha Eichstädt, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Alfred Link, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 14:20 Statistical Characterisation of Dynamic Propagation Environments for Mobile Wireless Communication Systems.. (208).. Luk Arnaut, National Physical Laboratory, United Kingdom.. 14:40 Dynamic Measurement Uncertainty of HV Voltage Dividers.. (325).. Jan Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden.. Anders Mannikoff, SP Technical Research Institute of Sweden, Measurement Technology, Sweden.. 15:00 Optimisation of Orthogonal Polynomial Signals for Direct Identification of Equivalent Circuit Parameters.. (258).. Marek Niedostatkiewicz, Gdańsk University of Technology, Dept.. of Optoelectronics and Electronic Systems, Poland.. Romuald Zielonko, Gdańsk University of Technology, Dept.. 15:20 Enhancing the Interpretability of Terahertz Data Through Unsupervised Classification.. (637).. Henrike Stephani, Fraunhofer Institute for Industrial Mathematics (ITWM), Kaiserslautern, Germany.. Michael Herrmann, Fraunhofer Institute for Physical Measurement Techniques (IPM), Kaiserslautern, Germany.. Karin Wiesauer, RECENDT GmbH, Linz, Austria.. Stefan Katletz, RECENDT GmbH, Linz, Austria.. Bettina Heise, Johannes Kepler Univ.. , Department of Knowledge-Based Mathematical Systems, Linz, Austria.. TC3 Oral Session 1 Monday, 16:20 to 18:20 – Infante D.. TC3 – Mass I.. 16:20 Determination of the Atomic Mass Constant by Ion Accumulation.. (49).. Christian Schlegel, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Michael Gläser, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Frank Schlolz, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Gabriela Bethke, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Michael Mecke, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 16:40 Analysis on the Effects of Stiffness in Mass Measurement Using Relay Feedback of Displacement.. (77).. Takeshi Mizuno, Saitama University, Japan.. Yuji Ishino, Saitama University, Japan.. Masaya Takasaki, Saitama University, Japan.. 17:00 Density Measurement System of 50 kg Weights by Method A in OIML R111 (2004) at CMS.. (99).. Feng-Yu Yang, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan.. Sheau-shi Pan, Center for Measurement Standards/Industrial Technology Research Institute, Taiwan.. 17:20 Cleaning of Silicon Density Standards.. (173).. Horst Bettin, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Detlef Schiel, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Martin Vogtmann, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Henning Niemann, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 17:40 Development and Realisation of a Fully Automatic Testing Facility for Determining the Volume of E1 Weights Up to 50 kg Based on Hydrostatic Weighing.. (261).. Christian Buchner, BEV- Bundesamt für Eich- und Vermessungswesen, Austria.. TC4 Oral Session 3 Monday, 16:20 to 18:20 – Pedro Álvares Cabral Room.. TC4 – Automated Test and Measurement Systems.. Co-Chairs: Grzegorz Lentka, Gdańsk University of Technology, Poland.. Co-Chairs: Damir Ilić, Faculty of Electrical Engineering and Computing, University of Zagreb, Croatia.. 16:20 Portable Analyzer for Impedance Spectroscopy.. (61).. Jerzy Hoja, Gdańsk University of Technology, Poland.. Grzegorz Lentka, Gdańsk University of Technology, Poland.. 16:40 An Application of TCRBF Neural Network in Multi-Node Fault Diagnosis Method.. (340).. Zbigniew Czaja, Gdańsk University of Technology, Dept.. Michal Kowalewski, Gdańsk University of Technology, Dept.. 17:00 Power Quality Measurement Analysis of the Electrostatic Precipitator.. (434).. Aleksandar Nikolic, Electrical Engineering Institute Nikola Tesla , Serbia.. Ilija Stevanovic, Electrical Engineering Institute Nikola Tesla , Serbia.. 17:20 Evaluation of IEEE1588 Applied to Synchronized Acquisition in Marine Sensor Networks (MSN).. (462).. Joaquín del Río, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain.. Daniel Toma, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain.. Antoni Mànuel, Sarti Research Group, Technical University of Catalonia in Vilanova i la Geltru, Spain.. 17:40 Using a Mouse Pointer as a Positioning Device in Eddy Current Testing.. (652).. Corrêa Alegria, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. Simões, Instituto Superior Técnico, Portugal.. Pimentel, Instituto Superior Técnico, Portugal.. Maurício, Instituto Superior Técnico, Portugal.. Calvário, Instituto Superior Técnico, Portugal.. Carvalho, Instituto Superior Técnico, Portugal.. Rocha, Instituto Superior Técnico, Portugal.. 18:00 Testing the Stability of GPS Oscillators Within Serbian Permanent GPS Stations Network.. (428).. Vukan Ogrizovic, Belgrade University, Faculty of Civil Engineering, Serbia.. Violeta Vasilic, Belgrade University, Faculty of Civil Engineering, Serbia.. Sinisa Delcev, Belgrade University, Faculty of Civil Engineering, Serbia.. Jelena Gucevic, Belgrade University, Faculty of Civil Engineering, Serbia.. TC4 Oral Session 4 Monday, 16:20 to 18:20 – Vasco da Gama Room.. TC4 – Waveform Analysis and Measurement.. Co-Chairs: Milos Sedlacek, Czech Technical University in Prague, Faculty of Electrical Engineering, Czech Republic.. 16:20 Design of DSP Windows Using Window Spectrum Zeros Placement.. (44).. Milos Sedlacek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Zdenek Stoudek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. 16:40 On-Line Estimation of Parameters of a Time Series.. (152).. Andrzej Dobrogowski, Poznan University of Technology, Telecommunication Systems and Optoelectronics, Poland.. Michal Kasznia, Poznan University of Technology, Telecommunication Systems and Optoelectronics, Poland.. 17:00 Significance of Correlation in the Uncertainty Evaluation of Sampling Oscilloscope Measurements.. (203).. Meinhard Spitzer, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Mark Bieler, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 17:20 Performance Comparison of Three Algorithms for Two-Channel Sinewave Parameter Estimation: Seven Parameter Sine Fit, Ellipse Fit, Spectral Sinc Fit.. (266).. Fernando M.. Janeiro, Instituto de Telecomunicações/Universidade de Évora, Portugal.. Tomáš Radil, Instituto de Telecomunicações, Portugal.. 17:40 New Algorithms for the Optimal Selection of the Bandpass Sampling Rate in Measurement Instrumentation.. (571).. Giovanni Betta, DAEIMI - University of Cassino, Italy.. Domenico Capriglione, DAEIMI - University of Cassino, Italy.. Luigi Ferrigno, DAEIMI - University of Cassino, Italy.. Gianfranco Miele, DAEIMI - University of Cassino, Italy.. 18:00 Digital Notch Filters Implementation with Fixed-Point Arithmetic.. (504).. Eduardo Pinheiro, Instituto de Telecomunicações, Portugal.. Pedro Silva Girão, Instituto de Telecomunicações/Instituto Superior Técnico, Portugal.. TC10 Monday, 16:20 to 18:20 – Fernão Mendes Pinto Room.. TC10 – Meeting.. Technical Diagnostics.. TC10.. TC11 Oral Session 1 Monday, 16:20 to 18:20 – Bartolomeu Dias Room.. TC11 – Metrological Infrastructure.. Co-Chairs: Mladen Boršić, Faculty of Electrical Engineering and Computing, Croatia.. Janko Drnovsek, University of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia.. 16:20 Uncertainty of Road Traffic Safety Measurements.. (3).. Edi Kulderknup, Estonian Accreditation Centre, Estonia.. Jürgen Riim, Estonian Accreditation Centre, Estonia.. Tuuli Levandi, Faculty of Science, Tallinn University of Technology, Estonia.. 16:40 The Role of Metrology Communities Under the WTO System: Measurement Science and Conformity Assessment Procedures.. (239).. Jookeun Park, KRISS, Korea.. Gun Woong Bahng, NCSRD, KRISS, Korea.. 17:00 Implementation of a Measurement Uncertainty Guideline for ISO/IEC 17025 Laboratory Assessors.. (510).. Daniel Homrich da Jornada, Certificar / Rede Metrológica, RS, Porto Alegre, Brazil.. Carla Schwengber ten Caten, PPGEP/UFRGS, Brazil.. 17:20 Smart Transducer Block Enables Plug Play Transducers.. (511).. Vítor Viegas, LabIM/ESTSetúbal, Polytechnic Institute of Setúbal, Portugal.. 17:40 Basic Characteristics of ZigBee and Simpliciti Modules to use in Measurement Systems.. (520).. Skrzypczak, Department of Electronics, Computer and System Sciences University of Calabria, Italy.. Domenico Grimaldi, Department of Electronics, Computer and System Sciences University of Calabria, Italy.. Rak, Inst.. of the Theory of Elec.. Eng.. , Inf.. and Meas.. Systems, Warsaw Univ.. 18:00 Speed Measurement Uncertainty in Metrological Verifications at IPQ.. (640).. Olivier Pellegrino, Instituto Português da Qualidade, Portugal.. Carlos Pires, Instituto Português da Qualidade, Portugal.. António Cruz, Instituto Português da Qualidade, Portugal.. TC17 Monday, 16:20 to 18:20 – Fernão de Magalhães Room.. TC17 – Meeting.. Measurement in Robotics.. TC17.. TC21 Oral Session 2 Monday, 16:20 to 18:20 – Luís Vaz de Camões Room.. TC21 – Uncertainty and Inference.. Co-Chairs: Alistair Forbes, National Physical Laboratory, United Kingdom.. Eduarda Filipe, Instituto Português da Qualidade, Portugal.. 16:20 Bayesian Analysis of a Calibration Model.. (53).. Ignacio Lira, Pontificia Universidad Católica de Chile, Chile.. Dieter Grientschnig, Boehler Edelstahl, Austria.. 16:40 Determining the 95% Confidence Interval of Arbitrary Non-Gaussian Probability Distributions.. (81).. France Pavlovcic, University of Ljubljana, Faculty of Electrical Engineering, Slovenia.. Janez Nastran, University of Ljubljana, Faculty of Electrical Engineering, Slovenia.. David Nedeljkovic, University of Ljubljana, Faculty of Electrical Engineering, Slovenia.. 17:00 Comparison of Two Diferent Approaches in the Uncertainty Calculation of Gravimetric Volume Calibration.. (160).. Elsa Batista, Instituto Português da Qualidade, Portugal.. Nelson Almeida, Instituto Português da Qualidade, Portugal.. João Alves e Sousa, Laboratório Regional de Engenharia Civil, Portugal.. 17:20 Measurement Uncertainty Evaluation Associated with Calibration Functions.. (467).. Cox, National Physical Laboratory, United Kingdom.. Alistair B.. Forbes, National Physical Laboratory, United Kingdom.. Harris, National Physical Laboratory, United Kingdom.. Smith, National Physical Laboratory, United Kingdom.. 17:40 Correlation in Uncertainty of Measurement - A Discussion of State of the Art Techniques.. (479).. Rüdiger Kessel, National Institute of Standards and Technology (NIST), United States of America.. Raghu N.. Kacker, National Institute of Standards and Technology (NIST), United States of America.. 18:00 Novel and Established Concepts for Considering Correlation in Uncertainty Evaluation.. (528).. Klaus-Dieter Sommer, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Bernd Siebert, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Anna-Lisa Hauswaldt, Physikalisch-Technische Bundesanstalt (PTB), Germany.. TC2 Tuesday, 08:30 to 09:50 – Fernão de Magalhães Room.. TC2 – Meeting.. Photonics.. TC2.. TC3 Oral Session 2 Tuesday, 08:30 to 09:50 – Pedro Álvares Cabral Room.. TC3 – Force Standard Machines - Improvements and Investigations.. Co-Chairs: José Ángel Robles, Director de la División Científica y de RRII, Director of Scientific and IIRR Division, Centro Español de Metrología (CEM), Spain.. Zhimin Zhang, National Institute of Metrology, P.. China.. 08:30 Improvement of the Realization of Forces Between 2 MN and 5 MN at PTB - The New 5 MN Force Standard Machine.. (172).. Falk Tegtmeier, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Mark Seidel, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 08:50 Improvement of Metrological Characteristics of INTI's 110 kN Force Standard Machine by Using the CENAM’s Six‑Component Dynamometer for Static and Dynamic Evaluation.. (205).. Alejandro Savarin, Instituto Nacional de Tecnología Industrial (INTI), Argentina.. Carlo Marinari, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Jorge C.. Torres-Guzmán, CENAM, Queretaro, Mexico.. 09:10 Influence of the Mutual Gravitational Attraction in a Set of Masses of Deadweight Machines.. (215).. Giancarlo D'Agostino, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Alessandro Germak, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Fabrizio Mazzoleni, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Danilo Quagliotti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Giulio Barbato, DISPEA, Politecnico di Torino, Italy.. 09:30 Investigation of the Influence of Carrier Frequency or Direct Current Voltage in Force Calibrations.. (388).. Daniel Schwind, Gassmann Testing and Metrology, Germany.. Torsten Hahn, GTM Gassmann Testing and Metrology GmbH, Germany.. TC4 WS ADC Session 1 Tuesday, 08:30 to 09:50 – Vasco da Gama Room.. TC4 – Workshop on ADC Testing - Session 1.. Co-Chairs: Vladimir Haasz, Deputy Head of Dept.. of Measurement, Czech Technical University in Prague, Faculty of Electrical Engineering, Czech Republic.. Luca De Vito, Department of Engineering, University of Sannio, Italy.. 08:30 Error in the IEEE 1057 Standard Random Noise Test of ADCs.. (474).. 08:50 Implementation of High Resolution DAC Test Station: A Contribution to Draft Standard IEEE P1658.. (643).. Aldo Baccigalupi, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy.. Mauro D'Arco, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy.. Annalisa Liccardo, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy.. Michele Vadursi, Università degli Studi di Napoli Parthenope , Italy.. 09:10 A New Approach to the Design of Post-DAC Filters.. (372).. Jacek Piskorowski, West Pomeranian University of Technology, Szczecin, Poland.. Roman Kaszynski, West Pomeranian University of Technology, Szczecin, Poland.. Miguel Angel Gutierrez de Anda, Instituto Nacional de Astrofísica, Optica y Electronica, Mexico.. Arturo Sarmiento-Reyes, Instituto Nacional de Astrofísica, Optica y Electronica, Mexico.. 09:30 Comparative Analysis of Different Acquisition Techniques Applied to Static and Dynamic Characterization of High Resolution DAC.. (599).. Domenico Luca Carnì, University of Calabria, Italy.. TC7 Oral Session 1 Tuesday, 08:30 to 09:50 – Infante D.. TC7 – Uncertainty.. Co-Chairs: Roman.. Morawski, Warsaw University of Technology, Faculty of Electronics and Information Technology, Institute of Radioelectronics, Poland.. Ivan Frollo, Institute of Measurement Science, Slovak Academy of Sciences, Slovakia.. 08:30 Modelling of Dynamic Measurements for Uncertainty Analysis by Means of Discretised State-Space Forms.. (580).. Uwe Hanebeck, Universität Karlsruhe, Germany.. Michael Krystek, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Albert Weckenmann, Friedrich-Alexander-University Erlangen-Nuremberg, Germany.. 08:50 Elements of Statistical Decision Making.. (321).. Kimmo Konkarikoski, Tampere University of Technology / ASE, Finland.. Risto Ritala, Tampere University of Technology, Finland.. 09:10 On-Line Determination of the Measurement Uncertainty of the Stochastic Measurement Method.. (278).. Ivan Župunski, Faculty of Technical Sciences, Novi Sad, Serbia.. Vladimir Vujicic, Faculty of Technical Sciences, Novi Sad, Serbia.. Zoran Mitrovic, Faculty of Technical Sciences, Novi Sad, Serbia.. Slobodan Milovancev, Faculty of Technical Sciences, Novi Sad, Serbia.. Mile Pesaljevic, Faculty of Organizational Sciences, Belgrade, Serbia.. 09:30 Improvement of Uncertainty by MCMC for Blood Chemical Analysis.. (41).. Yasuo Iwaki, Chaos Applied Research Office, Japan.. Tadao Inmuta, Chaos Applied Research Office, Japan.. TC11 Tuesday, 08:30 to 09:50 – Fernão Mendes Pinto Room.. TC11 – Meeting.. Metrological Infrastructures.. TC11.. TC15 Oral Session 1 Tuesday, 08:30 to 09:50 – Luís Vaz de Camões Room.. TC15 – Experimental Mechanics.. Co-Chairs: Peter Hessling, SP Technical Research Institute of Sweden, Measurement Technology, Sweden.. 08:30 Experimental Residual Stress Analysis of Welded Ball Valve.. (11).. Pavel Macura, VŠB-TU Ostrava, Faculty of Mechanical Engineering, Czech Republic.. František Fojtík, VŠB-TU Ostrava, Faculty of Mechanical Engineering, Czech Republic.. Radomír Hrnčář, Faculty of Mechanical Engineering, VŠB – TU Ostrava, Czech Republic.. 08:50 State-of-the-Art and New Developments of Multi-Degree-of-Freedom Piezoelectric Motors for Experimental Mechanics and Measuring Devices.. (143).. Ramutis Bansevicius, Kaunas University of Technology, Lithuania.. 09:10 Dynamic Calibration of a Bus.. (328).. Pingyu Zhu, Hunan University of Science and Technology, China.. Rongrong Wan, Hunan University of Science and Technology, China.. 09:30 Sea Seismometer Coupling on the Sediment.. (447).. Xavier Roset, Polytechnic University of Catalonia, SARTI, Spain.. Montserrat Carbonell, Polytechnic University of Catalonia, Department of Fluids Mechanics, Spain.. Spartacus Gomáriz, Polytechnic University of Catalonia, SARTI, Spain.. TC20 Oral Session 1 Tuesday, 08:30 to 09:50 – Bartolomeu Dias Room.. TC20 – Measurement in Civil Engineering.. Co-Chairs: Karim Hariri, TU Braunschweig, Germany.. 08:30 Multi-Axes Force Transducer Using the System for Acting Pressure Image Visualisation.. (477).. Volf, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic.. Novak, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Vitek, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic.. Novak, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic.. Vlcek, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic.. Stastny, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic.. Neděla, CTU in Prague, Faculty of Mechanical Engineering, Czech Republic.. 08:50 Surveillance of Steel Fibre Reinforced Concrete Slabs Measured with an Open-Ended Coaxial Probe.. (633).. Josep M.. Torrents, Department of Electronic Engineering (Technical University of Catalonia), Spain.. Pablo Juan-García, Department of Electronic Engineering (Technical University of Catalonia), Spain.. Oriol Patau, Dept.. of Electronic Engineering (Technical University of Catalonia), Spain.. Antonio Aguado, Dept.. of Construction Engineering (Technical University of Catalonia), Spain.. 09:10 Measurement of Moisture in Mortar Using a Coplanar Waveguide.. (525).. Tuesday, 11:00 to 12:20 – Infante D.. Co-Chairs: Luca Mari, Università Cattaneo - LIUC, Italy.. Paul Regtien, University of Twente, Fac.. Electrical Engineering, Mathematics and Computer Science, The Netherlands.. Franco Pavese, INRIM, Italy.. 11:00 Standing on the Shoulders of VIM.. (207).. Ludwik Finkelstein, Meaurement and Instrumentation Centre, City University London, United Kingdom.. TC3 Oral Session 3 Tuesday, 11:00 to 12:20 – Pedro Álvares Cabral Room.. TC3 – Dynamic Force Measurement.. Co-Chairs: Rolf Kumme, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Philippe Averlant, LNE - Laboratoire National de Métrologie et d'Essais, France.. 11:00 System Identification of Force Transducers for Dynamic Measurements.. (39).. Bernd Glöckner, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 11:20 Dynamic Behaviors of Checkweigher with Electromagnetic Force Compensation.. (184).. Yuji Yamakawa, Univ.. of Tokyo, Japan.. Takanori Yamazaki, Oyama National College of Technology, Japan.. Junichi Tamura, Anritsu Industrial Solutions Co.. , Ltd.. , Japan.. Osamu Tanaka, Anritsu Industrial Solutions Co.. 11:40 Static and Dynamic Measurement of Force Transducer's Deformation Under Load.. (317).. Andre Buß, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 12:00 Development of Accurate Weighing System Used Under the Vibration-Like Moving Conditions, Verification of Weghing System with 3 Accelerometers.. (544).. Yoshihiro Fujioka, Matsue College of Technology, Japan.. Kouta Miyake, Matsue College of Technology, Japan.. Jianxin Sun, National Institute of Advanced Industrial Science and Technology (AIST), Japan.. Toshiro Ono, professor emeritus at Osaka Prefecture University, Japan.. TC4 WS ADC Session 2 Tuesday, 11:00 to 12:20 – Vasco da Gama Room.. TC4 – Workshop on ADC Testing - Session 2.. Co-Chairs: Francisco Alegria, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal.. Dominique Dallet, University of Bordeaux - ENSEIRB, IMS Laboratory, France.. 11:00 Using Sinusoidal Instead of Triangular Stimulus Signals in the IEEE1057 Standard Random Noise Test of ADCs.. (475).. 11:20 Sine Wave Signal Sources for Testing High-Speed High-Resolution A/D Converters.. (484).. Vaclav Papez, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Jaroslav Roztocil, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Stanislav Dado, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. 11:40 A 3 Bits Discrete Pure Linear Analog Preprocessing Folding ADC Architecture Based on Cascade Controlled Channels.. (32).. Fabio Leccese, Roma Tre University, Italy.. Michael Magnone, Roma Tre University, Italy.. 12:00 High-Quality Low-Cost Low-Frequency Filter for ADC Testing.. (139).. Vladimir Haasz, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. David Slepicka, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. TC5 Oral Session 1 Tuesday, 11:00 to 12:20 – Bartolomeu Dias Room.. TC5 – Characterization of Hardness Indenters.. Co-Chairs: Edward Aslayan, Head of the Science Research Department Metrology in Mechanics, Thermodynamics and Construction, VNIIFTRI , Russia.. Renato Machado, INMETRO/DIMCI/DIMEC, Chefe do Laboratório de Força - LAFOR, Brazil.. 11:00 Geometric Measurement Comparisons for Rockwell Diamond Indenters.. (29).. John Song, National Institute of Standards and Technology (NIST), United States of America.. Samuel Low, National Institute of Standards and Technology (NIST), United States of America.. Alan Zheng, National Institute of Standards and Technology (NIST), United States of America.. 11:20 Estimation of Uncertainty in Rockwell Hardness Diamond Cone Indenters.. (551).. Jorge Trota Filho, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. Renato Reis Machado, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. Sérgio Pinheiro de Oliveira, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. Cláudio Afonso Koch, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. Islei Domingues da Silva, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. 11:40 New Possibilities in the Geometrical Calibration of Diamond Indenters.. (625).. Claudio Origlia, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. 12:00 Progress in the Characterization of the Geometry of Rockwell Diamond Indenters.. (155).. Gaoliang Dai, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Herrmann Konrad, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Febo Menelao, Physikalisch-Technische Bundesanstalt (PTB), Germany.. TC13 Oral Session 1 Tuesday, 11:00 to 12:20 – Luís Vaz de Camões Room.. TC13 – Respiratory Measurements.. Co-Chairs: Ireneusz Jablonski, Wroclaw University of Technology, Poland.. 11:00 A Complex Mathematical Model of the Respiratory System as a Tool for the Metrological Analysis of the Interrupter Technique.. (501).. Ireneusz Jabłoński, Wrocław University of Technology, Poland.. Adam G.. Polak, Wrocław University of Technology, Poland.. Janusz Mroczka, Wrocław University of Technology, Poland.. 11:20 Estimation Method for Consumption Energy for Humans in Daily Cycle.. (344).. Takao Sugimoto, College of Science and Technolog, NIhon University, Japan.. Yohsuke Yoshida, Student of graduate school, Science and Technology, Nihon University, Japan.. Yoshida, Student of graduate school, Science and Technology, Nihon University, Japan.. 11:40 Quantification of the Respiratory Time-Series Regularity and Complexity Using Approximate Entropy and Sample Entropy.. (506).. Ireneusz Jabłoński, Electronic and Photonic Metrology, Dep.. of Electronics, Wroclaw Univ.. Andrzej Czajka, Electronic and Photonic Metrology, Dep.. Janusz Mroczka, Electronic and Photonic Metrology, Dep.. TC15 Tuesday, 11:00 to 12:20 – Fernão Mendes Pinto Room.. TC15 – Meeting.. Experimental Mechanics.. TC15.. TC20 Tuesday, 11:00 to 12:20 – Fernão de Magalhães Room.. TC20 – Meeting.. Measurement Techniques for the Construction Industry.. TC20.. Tuesday, 13:40 to 15:40 – Infante D.. Co-Chairs: Paul Regtien, University of Twente, Fac.. Luca Mari, Università Cattaneo - LIUC, Italy.. 13:40 Measurement and Calibration: Considerations Based on the International Vocabulary of Metrology (VIM, 3.. rd.. Ed.. ) and Related Standards.. (385).. Roberto Buccianti, CEI – Comitato Elettrotecnico Italiano, Italy.. Marco Cibien, UNI – Italian Organization for Standardization, Italy.. Bruno Rebaglia, ITIA - CNR, Italy.. 14:00 Accuracy, Trueness, and Precision: Considerations Based on the International Vocabulary of Metrology (VIM, 3.. (417).. TC3 Oral Session 4 Tuesday, 13:40 to 15:40 – Pedro Álvares Cabral Room.. TC3 – Force Measurement Devices.. Co-Chairs: Philippe Averlant, LNE - Laboratoire National de Métrologie et d'Essais, France.. Amritlal Sawla, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 13:40 Evaluation of Cutting Device with Stroke Enlargemnet Mechanism.. (108).. Yoshitaka Morimoto, Kanazawa Institute of Technology, Japan.. 14:00 Fibre Bragg Sensors Compared with Electrical Strain Gauges for Use in Force Measurement - Prospects and Potentials.. (144).. Thomas Kleckers, Hottinger Baldwin Messtechnik GmbH, Darmstadt, Germany.. 14:20 Novel High-Resolution Interferometric Materials Testing Device for the Determination of the Viscoelastic Behaviour of High-Tech Plastics.. (212).. Michael Kühnel, Ilmenau University of Technology, Germany.. Falko Hilbrunner, Ilmenau University of Technology, Germany.. Gerd Jäger, Technical University Ilmenau, Germany.. 14:40 The Influence of the Force Feed-in System on High-Accuracy Low Force Measurement.. (331).. Roland Füßl, Technical University Ilmenau, Germany.. 15:00 Material Charactarization for a Terneol-D Based Force Sensor.. (404).. Klaus Oppermann, Johannes Kepler University, Institute for Measurement Technology, Austria.. Bernhard Zagar, Johannes Kepler University, Institute for Measurement Technology, Austria.. TC4 Oral Session 5 Tuesday, 13:40 to 15:40 – Vasco da Gama Room.. TC4 – Radio Frequency, Microwave and Milimiter Wave Measurements.. Co-Chairs: Leo Van Biesen, Vrije Universiteit Brussel, Department ELEC, Belgium.. Fernando Janeiro, Instituto de Telecomunicações, Universidade de Évora, Portugal.. 13:40 Interference Sensitivity of an Automatic Modulation Classifier.. (691).. Daniele Domenico Napolitano, TLC Testing Sannio Lab, Italy.. Sergio Rapuano, Department of Engineering, University of Sannio, Italy.. Maurizio Villanacci, Department of Engineering, University of Sannio, Italy.. 14:00 Automatic Signal Recognition for a Flexible Spectrum Management.. (690).. Niclas Björsell, ITB/Electronics, University of Gävle, Sweden.. Pasquale Daponte, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy.. Luca De Vito, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy.. Sergio Rapuano, Dipartimento di Ingegneria - Università degli Studi del Sannio, Italy.. 14:20 Indoor Positioning by Ultra Wide Band Radio Aided Inertial Navigation.. (164).. Alessio De Angelis, DIEI, University of Perugia, Italy.. John-Olof Nilsson, Signal Processing Lab, Royal Institute of Technology (KTH), Stockholm, Sweden.. Isaac Skog, Signal Processing Lab, Royal Institute of Technology (KTH), Stockholm, Sweden.. Peter Händel, Signal Processing Lab, ACCESS Linnaeus Center, Royal Institute of Technology, Sweden.. Paolo Carbone, DIEI, University of Perugia, Italy.. 14:40 Available Measurements in Current WiMAX Networks and Positioning Opportunities.. (6).. Mussa Bshara, Vrije Universiteit Brussel, Belgium.. Leo Van Biesen, Vrije Universiteit Brussel, Belgium.. 15:00 Measuring Demodulator Imbalance in Radio Frequency Receivers by Tone Test.. (14).. Per Zetterberg, Signal Processing Lab, ACCESS Linnaeus Center, Royal Institute of Technology, Sweden.. 15:20 Period Estimation of the Modulated Signal.. (289).. Dusan Agrez, Faculty of Electrical Engineering, University of Ljubljana, Slovenia.. TC4 Oral Session 6 Tuesday, 13:40 to 15:40 – Luís Vaz de Camões Room.. TC4 – Calibration, Metrology and Standards.. Co-Chairs: Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica - INRIM, Italy.. Gelson Rocha, INMETRO, Brazil.. 13:40 Multi-Range Transformer Bridge for Calibration of Inductance Standards.. (683).. Andrzej Met, Silesian University of Technology, Poland.. Krzysztof Musiol, Silesian University of Technology, Poland.. Tadeusz Skubis, Silesian University of Technology, Poland.. 14:00 Prediction of the Output Voltage of DC Voltage Standards.. (670).. Damir Ilić, Faculty of Electrical Engineering and Computing (FER), Croatia.. Alan Šala, Faculty of Electrical Engineering and Computing (FER), Croatia.. Ivan Leniček, Faculty of Electrical Engineering and Computing (FER), Croatia.. 14:20 Calibration of Capacitance Standards with a Quadrature Bridge.. (424).. Luca Callegaro, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Vincenzo D'Elia, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Bruno Trinchera, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. 14:40 Alternative Power Standard Realization at Radio Frequency.. (250).. Luciano Brunetti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Luca Oberto, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Marco Sellone, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. 15:00 Traceability Chain of the Capacitance Unit to Quantum Hall Effect at INMETRO - Four-Terminal Coaxial Bridge.. (97).. Renata Barros e Vasconcellos, Capacitance and Inductance Laboratory - INMETRO, Brazil.. Luiz Macoto Ogino, Capacitance and Inductance Laboratory - INMETRO, Brazil.. 15:20 Calibration of High Accuracy Class Standard Current Transformers.. (318).. Srdjan Milosavljevic, Electrical Engineering Institute Nikola Tesla , Serbia.. TC5 Oral Session 2 Tuesday, 13:40 to 15:40 – Bartolomeu Dias Room.. TC5 – Hardness Measurement, Standards and Application.. Co-Chairs: Gunwoong Bahng, Director of the National Center for Standard Reference Data, KRISS, Korea.. 13:40 Study of the Best Measurement Capability in Rockwell Scale at the Brazilian NMI INMETRO's Primary Hardness Standard Machine.. (548).. 14:00 Establishment of Brinell and Vickers Hardness Scales at UME.. (607).. Cihan Kuzu, TUBITAK UME (National Metrology Institute), Turkey.. 14:20 Accuracy of Standard Blocks for Hardness and Uncertainty of Hardness.. (50).. Takashi Yamamoto, Yamamoto Scientific Tool Laboratory, Japan.. Masayuki Yamamoto, Yamamoto Scientific Tool Laboratory, Japan.. Kensuke Miyahara, National Research Institute for Metals, Japan.. 14:40 Vibration Effect on Rockwell Scale C Hardness Measurement.. (5).. Tassanai Sanponpute, National Institute of Metrology, Thailand.. Apichaya Meesaplak, National Institute of Metrology, Thailand.. 15:00 A Contact Point Detection for Indentation Test of Low-k Film.. (420).. Koichiro Hattori, National Metrology Institute of Japan, AIST, Japan.. Yutaka Seino, National Metrology Institute of Japan, AIST, Japan.. Takashi Usuda, AIST/NMIJ, Japan.. 15:20 Influencing Parameters of Equivalent Indentation Test.. (51).. Tatsuya Ishibashi, Niigata University, Japan.. TC10 Oral Session 2 Tuesday, 13:40 to 15:40 – Fernão de Magalhães Room.. TC10 – Technical Diagnostics 2.. Co-Chairs: Marcantonio Catelani, University of Florence, Italy.. 13:40 Measurements of Acoustic Emission Induced by Partial Discharges in Foil-Based Capacitors for Their Quality Assessment.. (166).. Kazimierz Józwiak, ZPR Miflex S.. , Poland.. Marek Olesz, Faculty of Electrical and Control Engineering, Gdańsk University of Technology, Poland.. 14:00 Single Event Upset (SEU): Diagnostic and Error Correction System for Avioncs Device.. (442).. Lorenzo Ciani, University of Florence, Department of Electronics and Telecommunications, Italy.. Marcantonio Catelani, University of Florence, Department of Electronics and Telecommunications, Italy.. Lorenzo Veltroni, Sirio Panel S.. p.. A, Italy.. 14:20 Comparison Between Thermal Performance of Silver Conductive Adhesive and Sn-Ag-Cu Solder Joints in a Medical Ultrasound Array Transducer.. (445).. Valeria L Scarano, University of Florence, Italy.. Francesco Bertocci, University of Florence, Italy.. Roberto Singuaroli, University of Florence, Italy.. 14:40 Primary Calibration of Acoustic Emission Sensors.. (512).. Jiri Keprt, Brno University of Technology, Czech Republic.. Petr Beneš, Brno University of Technology, Czech Republic.. 15:00 Identification of Liquid Boiling by Acoustic Emission.. (536).. Miroslav Uher, Brno University of Technology, Czech Republic.. TC19 Tuesday, 13:40 to 15:40 – Fernão Mendes Pinto Room.. TC19 – Meeting.. Environmental Measurements.. TC19.. TC2 Oral Session 1 Tuesday, 16:20 to 18:20 – Pedro Álvares Cabral Room.. TC2 – Fiber Optics.. Co-Chairs: Tilo Pfeifer, RWTH Aachen University, Germany.. Yasuhiro Takaya, Department of Mechanical Engineering, Graduate School of Engineering, Osaka University, Japan.. 16:20 Novel Fiber Optic Sensor Based on in-Line Core-Cladding Intermodal Interferometer and Photonic Crystal Fiber.. (453).. Wojtek Bock, University of Quebec en Outaouais, Canada.. Tinko Eftimov, Plovdiv University “P.. Hilendarski”, Bulgaria.. Predrag Mikulic, University of Quebec en Outaouais, Canada.. Jiahua Chen, University of Quebec en Outaouais, Canada.. 16:40 Measurement of Roundness and Run-Out with Distributed Fiber-Optics Sensors.. (515).. Robert Schmitt, Fraunhofer Institute for Production Technology IPT, Germany.. Niels König, Fraunhofer Institute for Production Technology IPT, Germany.. Guilherme Francisco Mallmann, Fraunhofer Institute for  ...   Primary Gas Standards Preparation.. (435).. Gonçalo Baptista, Instituto Português da Qualidade, Portugal.. 15:00 Implementation, Validation and Application of a Method of Evaluation of Urinary 1-Hydroxypyrene as a Indicator of Human Exposure to Polycyclic Aromatic Hydrocarbons in Rio De Janeiro State, Brazil.. (448).. Eliane Cristina Pires do Rego, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. Annibal Duarte Pereira Netto, Dep.. of Analytical Chemistry, Institute of Chemistry, Federal Fluminense Univ.. , Brazil.. 15:20 Development of a Flow-Through Cell for Accurate Measurements of Low Electrolytic Conductivity.. (450).. Chiara Boveri, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Francesca Durbiano, Istituto Nazionale di Ricerca Metrologica, Italy.. Danilo Serazio, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Poster Session 3 Thursday, 13:40 to 15:40 – Infante D.. Poster Session 3 (TC4, TC12, TC15).. A Simple Fault Diagnosis Method for Analog Parts of Electronic Embedded Systems.. (19).. Why Reactive Compensators Do Not Improve the Efficiency Correctly in Unbalanced Circuits.. (121).. Vicente León-Martínez, Universidad Politécnica de Valencia, Spain.. Joaquím Montañana-Romeu, Universidad Politécnica de Valencia, Spain.. José Roger-Folch, Universidad Politécnica de Valencia, Spain.. Antonio Cazarola-Navarro, Universidad Politécnica de Valencia, Spain.. Evaluation of the Long Term Stability of Inductors Using Standard Error of Estimate.. (141).. A Precision Calibration Set-Up for AC Magnetic Flux Density Measurement in the Range of 1 Hz to 20 kHz.. (197).. Po Gyu Park, KRISS, Korea.. Young Gyun Kim, KRISS, Korea.. Wan-Seop Kim, KRISS, Korea.. Kalabin, D.. Vladlen Ya.. Shifirn, D.. DSP Based Power Analyzing System for Onsite Measurements.. (237).. W.. Wijesinghe, KRISS, Korea.. Young Tae Park, KRISS, Korea.. On the Design of Low-Power Signal Conditioners for Resistive Sensors.. (268).. Ramon Casanella, Universitat Politecnica de Catalunya, Spain.. Fast and Accurate Measurement of the RMS Value of a Noncoherent Sampled Sine Wave.. (284).. Increase of Strain Gage Output Voltage Signals Accuracy Using Virtual Instrument with Harmonic Excitation.. (290).. Dalibor Kuhinek, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Croatia.. Igor Zoric, University of Zagreb, Faculty of Mining, Geology and Petroleum Engineering, Croatia.. A Simple, Virtual Phase Shift Meter.. (327).. Four Terminal-Pair Coaxial Standards of Capacitance.. (377).. Jaroslav Bohacek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Radek Sedlacek, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Jan Kucera, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Low Noise DC Power Supplies.. (379).. Nonlinearity Testing of Equipment Used in Temperature Measurements.. (399).. Tadej Podgornik, University of Ljubljana, Faculty of Electrical Engineering, Slovenia.. Error Modeling of Static Energy Meters.. (405).. Carlo Carobbi, Dep.. of Electronics and Telecommunications, Università di Firenze, Italy.. Guido Pellicci, Firenze Tecnologia, Italy.. Simone Vieri, Dep.. Comparison of the Precision of Gain and Offset Estimations Obtained with the Histogram Test of ADCs.. (473).. Preliminary Evaluation of Quantum Hall Effect Devices by Photoreflectance Spectroscopy.. (482).. Zamora-Peredo, Universidad Politécnica de San Luis Potosí, Mexico.. Hernández-Sustaita, Universidad Politécnica de San Luis Potosí, Mexico.. Ivan C.. Hernández, Lasertel Inc.. , United States of America.. Méndez-García, Instituto de Investigación en Comunicación Óptica, UASLP, Mexico.. López-López, Departmento de Física, Centro de Investigaciones y de Estudios Avanzados - IPN, Mexico.. The Use of Traditional Spectrum Analyzers to Measure the Electromagnetic Pollution Generated by WiMAX Devices.. (502).. Luca Rossi, DAEIMI - University of Cassino, Italy.. Inductive Current Sensor Based on Nanocrystalline Alloys.. (503).. Euler C.. Macedo, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil.. José G.. Lira, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil.. Edson G.. Costa, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil.. Freire, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil.. Benedito A.. Luciano, Centro de Engenharia Elétrica e Informática, Universidade Federal de Campina Grande, Brazil.. Marcelo J.. Maia, Companhia Hidroeletrica do São Francisco (CHESF), Brazil.. Microsystems for Electrical AC Voltage Metrology.. (531).. Bounouh, LNE Laboratoire National de Métrologie et d'Essais, France.. Blard, LNE Laboratoire National de Métrologie et d'Essais, France.. Camon, LAAS/CNRS - Université de Toulouse, France.. Bélières, LNE Laboratoire National de Métrologie et d'Essais, France.. Ziadé, LNE Laboratoire National de Métrologie et d'Essais, France.. Real Time Distribution Using Radio Time Tones of Commercial Broadcasting System.. (555).. Youngbeom Kim, KRISS, Korea.. Youngkyu Lee, KRISS, Korea.. Ant-Based Search Strategy for Industrial Multiple-Fault Diagnostics.. (558).. Carlo Manna, Dipartimento di Ingegneria Elettrica - Università degli Studi di Napoli Federico II, Italy.. Giuseppe Montenero, CERN European Organization for Nuclear Research, Geneva, Switzerland.. Automatic Calibration System for Digital Instruments Without Built-In Communication Interface.. (559).. Andria, Polytechnic of Bari, Italy.. Fabbiano, Polytechnic of Bari, Italy.. Savino, Polytechnic of Bari, Italy.. A Minimally-Invasive System for Free-Living Activity Monitoring in Home Care.. (584).. Fabrizio Clemente, Istituto di Ingegneria Biomedica - CNR, Italy.. Thermoelastic Signal Processing Using an FFT Lock-In Based Algorithm on Extended Sampled Data.. (588).. D’Acquisto, Dipartimento di Meccanica, Università degli Studi di Palermo, Italy.. Normanno, Dipartimento di Meccanica, Università degli Studi di Palermo, Italy.. Pitarresi, Dipartimento di Meccanica - Università di Palermo, Italy.. Siddiolo, Sintesi SCpA, Italy.. Flexibility Experimental Test of the Software Framework for Magnetic Measurements at CERN.. (612).. of Technology, Group of Magnets Superconductors Cryostats, CERN, Switzerland.. Analysis of Rogowski Coil Behavior Under Non Ideal Measurement Conditions.. (650).. Crotti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Giordano, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Morando, Dipartimento di Ingegneria Elettrica Politecnico di Torino, Italy.. DWT Analysis of Selected Transient and Notching Disturbances.. (660).. Mariusz Szweda, Gdynia Maritime University, Department of Ship Electrical Power, Poland.. FEM Analysis of Rogowski Coils Coupled with Bar Conductors.. (676).. Mirko Marracci, University of Pisa, Italy.. Bernardo Tellini, University of Pisa, Italy.. Carmine Zappacosta, University of Pisa, Italy.. On the Model of MV Power Line Communication System in the Case of Line to Line Transmission.. (687).. Tinè, Institute on Intelligent Systems for the Automation/Research National Council, Italy.. Calibrator of Alternative Voltage Based on the Method of Reproduction of Value of Direct Voltage.. (689).. Sergiej Taranow, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine.. Yurij Tesyk, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine.. Oleh Karasinskij, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine.. Stanislava Pronselev, The Institute of Electrodynamics of The National Ukrainian Academy of Science, Ukraine.. DSL Interoperability Testing Laboratory.. (692).. Doris Bao, Department of Engineering, University of Sannio, Italy.. An Inherently Linear Transducer Using Thermal Sigma-Delta Modulator.. (2).. Valter C.. Rosa, Federal University of Bahia, Brazil.. Ligia S.. Palma, Federal University of Bahia, Brazil.. Luiz Fernando G.. Amaral, Federal University of Bahia, Brazil.. Measurement of the Size of Source for Pyrometers Directly Indicating in Temperature.. (40).. Maria Jose Martin, Centro Español de Metrología, Spain.. Manuel Zarco, Centro Español de Metrología, Spain.. Dolores del Campo, Centro Español de Metrología, Spain.. Study of the Influence of Convective Effects in Incident Radiative Heat Flux Density Measurement Uncertainty.. (101).. Luís Lages Martins, Laboratório Nacional de Engenharia Civil, Portugal.. Carlos Pina dos Santos, Laboratório Nacional de Engenharia Civil, Portugal.. Calculated Uncertainty of the Thermal Diffusivity Measurement Based on Flash Laser Method.. (126).. Fabrício Lima Migliorini, National Commission of Nuclear Energy/Nuclear Tech.. Egonn Hendrico Carvalho Silva, National Commission of Nuclear Energy/Nuclear Tech.. Pablo Andrade Grossi, National Commission of Nuclear Energy/Nuclear Tech.. Ricardo Alberto Neto Ferreira, National Commission of Nuclear Energy/Nuclear Tech.. Influence of Radiation Diffraction Upon Metrological Parameters of the IR Line Scanner.. (393).. Leszek Rozanski, Poznan University of Technology, Poland.. Stanislaw Poloszyk, Poznan University of Technology, Poland.. Low Temperature Calibration Facilities at KRISS.. (547).. Inseok Yang, KRISS, Korea.. Yong-Gyoo Kim, KRISS, Korea.. Chang Ho Song, KRISS, Korea.. Kee Hoon Kang, KRISS, Korea.. Kee Sool Gam, KRISS, Korea.. New Primary Low-Range Dew-Point Generator at LPM.. (554).. Davor Zvizdic, Faculty of Mechanical Engineering and Naval Architecture, Croatia.. Martti Heinonen, Centre for Metrology and Accreditation (MIKES), Finland.. Tomislav Veliki, Laboratory for Process Measurement (LPM), Croatia.. Daniel Sestan, Laboratory for Process Measurement (LPM), Croatia.. Advanced Thermal Measurements of Modern Manufacturing Systems.. (579).. An Evaluation of a Simple Dynamical Model for Impacts Between Rigid Objects.. (490).. Erik Molino Minero Re, Polytechnic University of Catalonia (SARTI), Vilanova i la Geltrú, Spain.. Mariano López, Polytechnic University of Catalonia (SARTI), Vilanova i la Geltrú, Spain.. Alfonso Carlosena, Universidad Pública de Navarra, Spain.. Xavier Roset, Polytechnic University of Catalonia (SARTI), Vilanova i la Geltrú, Spain.. TC4 Oral Session 11 Thursday, 16:20 to 18:20 – Vasco da Gama Room.. Co-Chairs: Janusz Mindykowski, Gdynia Maritime University, Poland.. 16:20 Evaluation of an Asynchronous Sampling Correction Technique Suitable for Power Quality Measurements.. (73).. Paul Clarkson, National Physical Laboratory, United Kingdom.. Paul Wright, National Physical Laboratory, United Kingdom.. 16:40 Detection of Short Transients and Interruptions Using the Hilbert Transform.. (274).. Zbigniew Leonowicz, Wrocław University of Technology, Poland.. 17:00 Single-Phase Power Quality Analyzer Based on a New Detection and Classification Algorithm.. (426).. 17:20 DSP-Based Instrument for Power Quality Monitoring on Ships.. (592).. Tomasz Tarasiuk, Gdynia Maritime University, Poland.. 17:40 Characterization Issue of Power Quality Instruments.. (604).. 18:00 Current Harmonics Generated by Lamps: A Comparison in Different Conditions of Supply Voltage.. (601).. Claudio Cicala, Department of Electrical Engineering - “Sapienza” Università di Roma, Italy.. Luca Podestà, Department of Electrical Engineering - “Sapienza” Università di Roma, Italy.. TC7 Thursday, 16:20 to 18:20 – Fernão Mendes Pinto Room.. TC7 – Meeting.. Measurement Science.. TC7.. TC9 Oral Session 2 Thursday, 16:20 to 18:20 – Fernão de Magalhães Room.. TC9 – Flow Measurement - Gases etc.. Co-Chairs: Jian Wu, National Metrology Centre of Agency for Science, Technology and Research (A*STAR), Singapore.. 16:20 Laser Doppler Velocity Profile Sensor: Technical Advances for the Optical Flow Rate Measurement of Natural Gas.. (186).. Andreas Voigt, Faculty of Electrical and Computer Engineering, Technische Universität Dresden, Germany.. Harald Müller, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 16:40 Numerical and Experimental Study of Effects of Upstream Disturbances on Accuracy of Vortex-Shedding Flow Meter.. (194).. Pierre Cambier, ICAM Ecole d’ingenieurs, France.. Vandermarlière, ICAM Ecole d’ingenieurs, France.. Ernst von Lavante, University Duisburg-Essen, Germany.. U.. Banaszak, University Duisburg-Essen, Germany.. Krisch, Krohne Messtechnik GmbH, Germany.. Sylvain Tournillon, Krohne Messtechnik GmbH, Germany.. 17:00 Realisation of a Primary Air Velocity Standrad Using Laser Doppler Anemometer and Precision Wind Tunnel.. (413).. Jian Wu, National Metrology Centre of Agency for Science, Technology and Research (A*STAR), Singapore.. 17:20 Aerodynamic Loads Measurement of a Sounding Rocket Vehicle Tested in Wind Tunnel.. (478).. Maria Luísa Reis, Institute of Aeronautics and Space, Brazil.. João Batista Falcão, Institute of Aeronautics and Space, Brazil.. Giuliano Paulino, São Paulo State University, Brazil.. Cláudio Truyts, Institute of Aeronautics and Space, Brazil.. 17:40 Numerical Test Rig for Turbine Gas Meter.. (234).. Toralf Hoch, RMG Messtechnik GmbH, Germany.. 18:00 Advanced Phasor Control for a Coriolis Mass Flow Meter (CMFM).. (402).. Röck, Christian-Albrechts-University of Kiel, Germany.. Felix Koschmieder, Christian-Albrechts-University of Kiel, Germany.. TC12 Oral Session 4 Thursday, 16:20 to 18:20 – Bartolomeu Dias Room.. TC12 – Calibrations and Intercomparisons.. Co-Chairs: Eduarda Filipe, Instituto Português da Qualidade, Portugal.. Jovan Bojkowski, University of Ljubljana, Faculty of Electrical Engineering, Laboratory of Metrology and Quality, Slovenia.. 16:20 Noise and Interference in Thermometry Resistance Bridges.. (368).. 16:40 Practical Limits of Measurement Uncertainties in Calibration of Standard Platinum Resistance Thermometers by Comparison.. (367).. Jovan Bojkovski, Univ.. Valentin Batagelj, Univ.. Vincencij Žužek, Univ.. 17:00 Interlaboratory Comparison of Digital Thermometer Between the Temperature Range from -40 °C to 420 °C.. (567).. Aliye Kartal Dogan, TUBITAK UME (National Metrology Institute), Turkey.. Ali Uytun, TUBITAK UME (National Metrology Institute), Turkey.. Kursat Ozdemir, TURKAK (Turkish Accreditation Agency), Turkey.. 17:20 Development of an Automatic Calibration System for Clinical Electrical Thermometers.. (87).. Hongwei Xu, College of Mechatronics Engineering, China Jiliang University, China.. 17:40 Comparison of Thermocouple Temperature Scales Realized by Fixed-Point and Radiation Methods.. (181).. 18:00 Uncertainties in the Whole Range of the Calibration of a Thermocouple.. (666).. Peter Benkó, STU Faculty of Mechanical Engineering, Slovakia.. Rudolf Palenčár, STU Faculty of Mechanical Engineering, Slovakia.. TC13 Oral Session 4 Thursday, 16:20 to 18:20 – Luís Vaz de Camões Room.. TC13 – Biomeasurements.. Co-Chairs: Nikolaus Bezruczko, Measurement and Evaluation Consulting, Chicago, United States of America.. 16:20 Fundamental Measurement for Functional Caregiving in Rehabilitation Medicine.. (91).. Nikolaus Bezruczko, Measurement and Evaluation Consulting, Chicago, United States of America.. Shu-Pi Chen, Saint Xavier University, United States of America.. Constance Hill, Children's Memorial Hospital, United States of America.. Joyce Chesniak, Children's Memorial Hospital, United States of America.. 16:40 New Method for Locomotor Activity Measures in Instrumented Animals with Implant Based on Inductive Coupling.. (296).. Marcus Tadeu Pinheiro Silva, Federal Center for Technological Education - MG, Brazil.. Guilherme Augusto Silva Pereira, Federal University of Minas Gerais, Brazil.. 17:00 Analysis and Design of Inductive Biosensors for Magnetic Immuno Assay.. (481).. Angela Beninato, DIEES- University of Catania, Italy.. Giorgio Fallica, STMicroelectronics, Italy.. Vincenzo Marletta, DIEES- University of Catania, Italy.. Nicola Pitrone, DIEES- University of Catania, Italy.. 17:20 Correlation of Near and Far Infrared Vein Recognition for Unified Processing and Simulation.. (437).. of Electrical Engineering, Tech.. Ioan Gavril Tarnovan, Technical University of Cluj-Napoca, Romania.. Bogdan Tebrean, Technical University of Cluj-Napoca, Romania.. Titus Eduard Crisan, Technical University of Cluj-Napoca, Romania.. 17:40 Electrochemical Immunoassay for Cardiac Markers with Magnetic Particles as a Solid Phase and Silver Nanoparticles as an Electroactive Bio-Label.. (492).. Mateusz Szymanski, Cranfield University / National Physical Laboratory, United Kingdom.. Robert Porter, National Physical Laboratory, United Kingdom.. 18:00 3-Dimensional Spectroscopic-Tomography of Biological Membrane by the Imaging-Type 2-D Fourier Spectroscopy.. (72).. Takashi Takuma, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. Shinji Yabushita, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. Takeshi Kawajiri, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. Kana Yanogawa, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. Takaki Harada, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. Kazuya Yamamoto, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. Ichirou Ishimaru, Faculty of Engineering, Kagawa University, Takamatsu, Japan.. TC14 Oral Session 4 Thursday, 16:20 to 18:20 – Pedro Álvares Cabral Room.. TC14 – Optical Metrology in High-Precision Measurements.. Co-Chairs: Ryoshu Furutani, Department of Precision Engineering, Faculty of Engineering, Tokyo Denki University, Japan.. Jerzy Sladek, Laboratory of Coordinate Metrology, Mechanical Department, Cracow University of Technology, Poland.. 16:20 Limitations of Precision Length Measurements Based on Interferometers.. (37).. 16:40 Three Dimensional Profile Measurement of Four-Step Reference Specimens Using the Fringe Scanning Fourier Transform Method.. (102).. Chu-Shik Kang, KRISS, Korea.. Jae Wan Kim, KRISS, Korea.. Jong-Ahn Kim, KRISS, Korea.. 17:00 New Demosaicing Algorithm Especially for Measurement of Geometries by Image Processing.. (113).. Holger Weissensee, Ilmenau University of Technology, Germany.. 17:20 Nano-Dimensional Measurement Using Optically Trapped Probe Enhanced by Interferometric Scale.. (199).. Masaki Michihata, Osaka University, Japan.. Daisuke Nakai, Osaka University, Japan.. Terutake Hayashi, Osaka University, Japan.. Yasuhiro Takaya, Osaka University, Japan.. 17:40 Mechatronic Approach in Precision Measurements.. (352).. Mindaugas Rybokas, Vilnius Gediminas Technical University, Lithuania.. 18:00 Absolute Distance Metrology for Long Distances with Dual Frequency Sweeping Interferometry.. (647).. Alexandre Cabral, Faculty of Science of the University of Lisbon, Portugal.. Manuel Abreu, Faculty of Science of the University of Lisbon, Portugal.. José M.. Rebordão, Faculty of Science of the University of Lisbon, Portugal.. Poster Session 4 Thursday, 16:20 to 18:20 – Infante D.. Poster Session 4 (TC5, TC10, TC16, TC20, TC21, TC22, TC23, TC24).. Application of PSI/SCM Microscope for Nanoindentation Tester.. (329).. Masayuki Fujitsuka, Japan Society for the Promotion of Machine Industry, Japan.. Makoto Yamaguchi, Japan Society for the Promotion of Machine Industry, Japan.. Shigeru Ueno, Japan Society for the Promotion of Machine Industry, Japan.. Genichiro Kamiyama, Lasertec Corporation, Japan.. Shigeo Katayama, Fischer Instruments K.. K.. Installation and Uncertainty Evaluation of Reference Hardness Standard of Croatia.. (382).. Željko Alar, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia.. Mladen Franz, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia.. Tamara Aleksandrov, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia.. Sanja Šolić, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia.. A Simple Mathematical Method Used to Describe the Indenter Tip Area Function.. (606).. Pedro Bastos Costa, National Institute of Metrology, Standardization and Industrial Quality - INMETRO, Brazil.. Application of the Scanning Electron Microscope for the Analysis of the Reference Hardness Block Surface Quality.. (644).. Suzana Jakovljević, University of Zagreb, Faculty of Mechanical Engineering and Naval Architecture, Croatia.. Influence of Reliability on the Tradtional Control Charts: A Reliable Shewhart Control Chart.. (34).. Stefano De Falco, Research and Technology Transfer Office, School of Science and Tech.. , Univ.. of Naples, Italy.. Nello Polese, Dept.. of Electrical Engineering, University of Naples Federico II, Italy.. Traceability of Refrigerant Leak Tightness.. (43).. Isabelle Morgado, Laboratoire National de Métrologie et d'Essais, France.. Pierre Otal, Laboratoire National de Métrologie et d'Essais, France.. Jean-Claude Legras, Laboratoire National de Métrologie et d’Essais, France.. Denis Clodic, Centre d'Energétique et des Procédés, Ecole des Mines de Paris, France.. Car’s Ignition System Diagnostics Using Continuous Wavelet Transform.. (54).. Petr Ježdík, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Jirí Novák, CTU in Prague, Faculty of Electrical Engineering, Czech Republic.. Fault Diagnosis of Fully Differential Circuits in Electronic Embedded Systems.. (313).. Wojciech Toczek, Gdańsk University of Technology, Poland.. Quality Assessment of Metal Oxide Varistors by Noise Spectroscopy.. (351).. Contactless Diagnostics of Thin Film Layers.. (371).. Measurement of Surface Displacement Excited by EMAT Transducer.. (411).. Petr Fidler, Brno University of Technology, Faculty of Electrical Engineering and Communication, Czech Republic.. Petr Beneš, Brno University of Technology, Faculty of Electrical Engineering and Communication, Czech Republic.. Novel and Low-Cost Temperature Compensation Technique for Piezoresistive Pressure Sensors.. (74).. Ferran Reverter, Universitat Politècnica de Catalunya, Spain.. Goran Horak, University of Zagreb, Croatia.. Vedran Bilas, University of Zagreb, Croatia.. Manel Gasulla, Universitat Politècnica de Catalunya, Spain.. Uncertainty of Measurement of Transient Pressure.. (148).. Zhijie Zhang, North University of China, China.. Wei Wang, North University of China, China.. Wenlian Wang, North University of China, China.. Daihua Wang, North University of China, China.. Differential Pressure Comparison from 20 Pa to 3 500 Pa Between CEM-Spain and CENAM-Mexico.. (416).. Pablo Olvera, Centro Nacional de Metrología, Mexico.. Volume Determination of a Vacuum Vessel by Pressure Rise Method.. (632).. Janez Setina, Institute of Metals and Technology, Slovenia.. Bojan Erjavec, Institute of Metals and Technology, Slovenia.. Remote Control of Electrical Appliances Via Power Line 230 V.. (83).. Milan Adamek, Faculty of Applied Informatics, Tomas Bata Univerzity in Zlin, Czech Republic.. Pavel Martinec, Faculty of Applied Informatics, Tomas Bata Univerzity in Zlin, Czech Republic.. Michaela Barinova, Faculty of Applied Informatics, Tomas Bata University in Zlin, Czech Republic.. Calibration of Detection System of Crack in Concrete Structure by Using Image Processing Technology.. (332).. Man-Yong Choi, ESM Center, KRISS, Korea.. Su-Un Kim, Department of Architecture Engineering, Hanyang University, Korea.. Jeong-Hak Park, ESM Center, KRISS, Korea.. Kee-Hwan Jee, Department of Civil Engineering, Chungnam National University, Korea.. Sung-Woo Shin, Department of Architecture Engineering, Hanyang University, Korea.. Experimental Research of an Inductive Dynamic Drive for Different Coil Power Supply Systems.. (594).. Piotr Jankowski, Gdynia Maritime University, Poland.. Boleslaw Dudojć, Gdynia Maritime University, Poland.. Andrzej Piłat, Gdynia Maritime University, Poland.. A Novel Sensor for Monitoring Settlement.. (677).. Hongyang Zeng, Hunan University of Science and Technology, China.. Guilin Jiang, Hunan University of Science and Technology, China.. Yang Zhou, Research Centre on Levee Safety Disaster Prevention Ministry of Water Resources, China.. PC Tool for Data Analysis in Calibration of Special Weights.. (18).. Sterica Baicu, National Institute of Metrology, Romania.. Research and Measurements of Velocity Field During Extrusion Process.. (33).. Leo Gusel, University of Maribor, Faculty of Mechanical Engineering, Slovenia.. Rebeka Rudolf, University of Maribor, Faculty of Mechanical Engineering, Slovenia.. The Choice of Method to the Evaluation of Measurement Uncertainty in Metrology.. (65).. Álvaro Silva Ribeiro, Federal Fluminense University, Dep.. of Analytical Chemistry, Institute of Chemistry, Brazil.. Evaluating Uncertainties of Laserscanner Measurements by Using a Joint Monte Carlo and Fuzzy Approach.. (389).. Hamza Alkhatib, Geodetic Institute, Leibniz University of Hannover, Germany.. Ingo Neumann, Geodetic Institute, Leibniz University of Hannover, Germany.. Hansjürg Kutterer, Geodetic Institute, Leibniz University of Hannover, Germany.. Identification of Measurement Data Processing Algorithm Coefficients Presented on Selected Form of FFT Algorithm.. (496).. Krzysztof Konopka, Inst.. of Measurement Science, Electronics and Control, Silesian Univ.. Tadeusz Topór-Kamiński, Inst.. The Best Measurand Estimators of Trapezoidal PDF.. (513).. Warsza Zygmunt Lech, Polish Society of Metrology, Poland.. Galovska Maryna, National Technical University of Ukraine, Ukraine.. Importance of Scaling in Unsupervised Distance-Based Anomaly Detection.. (517).. Pekka Kumpulainen, Tampere University of Technology, Finland.. Mikko Kylväjä, Aditro, Finland.. Kimmo Hätönen, Nokia Siemens Networks, Finland.. Shifted Up Cosine Function as Model of Probability Distribution.. (530).. Zygmunt Lech Warsza, Polish Metrological Society, Poland.. Marian Jerzy Korczynski, Technical University of Lodz, Poland.. Maryna Galovska, National Technical University of Ukraine Kyiv Polytechnic Institute , Ukraine.. Estimation of Positive Parameters in Form and Roughness Assessment.. (556).. Improved Vehicle Parameter Estimation Using Sensor Fusion by Kalman Filtering.. (641).. Erik Steinmetz, SP Technical Research Institute of Sweden, Sweden.. Ragne Emardson, SP Technical Research Institute of Sweden, Sweden.. Per Jarlemark, SP Technical Research Institute of Sweden, Sweden.. Upgrade of the Medium and High Frequency Vibration Calibration Reference Equipment and Extension to Low Frequencies.. (165).. Philippe Averlant, LNE Laboratoire National de Métrologie et d'Essais, France.. Claire Bartoli, LNE Laboratoire National de Métrologie et d'Essais, France.. STASI (Seismic Accelerometers Calibration System).. (244).. Aldo Terrusi, ENEA C.. Renzo Romagnoli, ENEA C.. Roberto Silvestro, ENEA C.. Domenico Ianniello, ENEA C.. Measurements for the Evaluation of Vibration Exposure of Operators in a Ship Container Terminal.. (431).. Vibration Analysis Based on Hammer Impact Test for Multi-layer Fouling Detection.. (457).. Jaidilson Silva, Federal University of Campina Grande, Brazil.. Franz Neff, Federal University of Campina Grande, Brazil.. Time Drift of Ocean Bottom Seismometers (OBS).. (463).. Shariat-Panahi, Sarti Research Group.. Technical University of Catalonia in Vilanova i la Geltru, Spain.. Antoni Mànuel, Technical University of Catalonia (UPC), Vilanova i la Geltru, Spain.. Joaquín del Río, Technical University of Catalonia (UPC), Vilanova i la Geltru, Spain.. A New, Low-Cost, on-Line RGB Colorimeter for Wine Industry Based on Optical Fibers.. (225).. Cristina de la Torre, University of Oviedo, Spain.. Rocío Muñiz, University of Oviedo, Spain.. Miguel Angel Pérez, University of Oviedo, Spain.. A Calibration Method, Based on Ridge LS Estimator Designed for Determination of Olive Oil Mixtures on the Basis of NIR Spectral Data.. (263).. Andrzej Miękina, Warsaw University of Technology, Poland.. Roman Z.. Morawski, Warsaw University of Technology, Poland.. Traceability Statement for the Determination of Total Chromium Mass Fraction in Serpentine Soils by Atomic Absorption Spectrometry.. (407).. Maria Ascensão Trancoso, Instituto Nacional de Engenharia, Tecnologia e Inovação, Portugal.. Sheila Alves, Instituto Superior Técnico, Portugal.. Margarida Correia dos Santos, Instituto Superior Técnico, Portugal.. Calibration and Verification of Breath Alcohol Detectors in Portugal.. (476).. Tânia Farinha, Instituto Português da Qualidade, Portugal.. Fátima Dias, Instituto Português da Qualidade, Portugal.. Evaluation of Measurement Uncertainty for the Moisture and Dry Matter Mass Fractions in Industrial Residues and Sludges.. (533).. Filomena C.. Mouro, LNEG – Laboratório Nacional de Energia e Geologia, IP.. Sandra C.. Calisto, LNEG – Laboratório Nacional de Energia e Geologia, IP.. Maria Ascensão Trancoso, LNEG – Laboratório Nacional de Energia e Geologia, IP.. Study, Development, and Implementation of Analysis Technique of Biphasic Attenuation Systems Using Ultrasound.. (545).. Monique K.. Figueiredo, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil.. Rodrigo P.. Costa-Felix, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil.. André V.. Alvarenga, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil.. Luiz E.. Maggi, Laboratory of Ultrasond, Diavi/DIMCI/INMETRO, Brazil.. Marcio F.. Portilho, CENPES/Petrobras, Brazil.. Marcio N.. Souza, Institute of Chemistry, UFRJ, Brazil.. Gilberto A.. Romeiro, Institute of Chemistry, UFF, Campus of Valonguinho, Brazil.. Homogeneity Study for Certification of a Candidate Reference Material for Polycyclic Aromatic Hydrocarbons.. (570).. Evelyn de F.. Guimarães, Organic Analysis Laboratory – INMETRO/Chemical Department, Military Institute of Eng.. Helen Cristine Moreira Cunha, INMETRO - Instituto Nacional de Metrologia, Normalização e Qualidade Industrial, Brazil.. Janaína M.. Rodrigues, Organic Analysis Laboratory – INMETRO, Brazil.. José Daniel Figueroa Villar, IME - Military Institute of Engineering, Chemical Department, Brazil.. Valnei Smarçaro da Cunha, Organic Analysis Laboratory – INMETRO/Chemical Dep.. , Military Institute of Eng.. TC3 Oral Session 9 Friday, 08:30 to 09:50 – Infante D.. TC3 – Force Measurement from Micro- to Pico-Newton.. Co-Chairs: Yon-Kyu Park, Force Measurement Evaluation Lab.. 08:30 Determination of Micro-Forces from 1 µN up to 10 N Realized with a Full Automatically Dead Load Machine Developed by the BEV.. (264).. 08:50 Accurate Picoscale Forces for Insitu Calibration of AFM.. (285).. Koo-Hyun Chung, National Institute of Standards and Technology (NIST), United States of America.. Gordon Shaw, National Institute of Standards and Technology (NIST), United States of America.. Jon R.. Pratt, National Institute of Standards and Technology (NIST), United States of America.. 09:10 KRISS Approach to Pico-Newton Standard Force Realization.. (458).. Jae-Hyuk Choi, KRISS, Korea.. Min-Seok Kim, KRISS, Korea.. Yun Won Kim, KRISS, Korea.. TC4 Oral Session 12 Friday, 08:30 to 09:50 – Vasco da Gama Room.. TC4 – Digital and Mixed Signal Processing.. Co-Chairs: Artur Lopes Ribeiro, Instituto de Telecomunicações, Instituto Superior Técnico, Portugal.. Domenico Grimaldi, University of Calabria, Italy.. 08:30 Estimation and Prediction of the Clock Phase Fluctuations and Time-Interval Error.. (71).. Marek Zielinski, Nicolaus Copernicus University, Institute of Physics, Poland.. Marcin Kowalski, Nicolaus Copernicus University, Institute of Physics, Poland.. Dariusz Chaberski, Nicolaus Copernicus University, Institute of Physics, Poland.. Slawomir Grzelak, Nicolaus Copernicus University, Institute of Physics, Poland.. 08:50 Implementation of Accelerated Impedance Spectrum Measurement Method.. (600).. 09:10 Estimation of Residual Error Parameters for Vector Network Analyzers.. (62).. Gerd Wübbeler, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Rolf Judaschke, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 09:30 Precise Phase-Sensitive Detector with Switched Two-Terminal RC Network.. (188).. TC8 Friday, 08:30 to 09:50 – Fernão Mendes Pinto Room.. TC8 – Meeting.. Traceability in Metrology.. TC8.. TC14 Oral Session 5 Friday, 08:30 to 09:50 – Luís Vaz de Camões Room.. TC14 – Measurement of Surface Characteristics.. 08:30 Development of Refractory Thickness Meter for Torpedo Ladle Car.. (60).. Yoshito Isei, Sumitomo Metal Industries, Ltd, Japan.. Tatsuro Honda, Sumitomo Metal Industries, Ltd, Japan.. Kenichi Akahane, Sumitomo Metal Industries, Ltd, Japan.. Hideyuki Takahashi, Sumitomo Metal Industries, Ltd, Japan.. 08:50 Calculation of Reference Surface Parameters for Elements Whose Generatrix is a Fragment of a Circle.. (162).. 09:10 2.. nd.. Generation Lead Measurement.. (573).. Jörg Seewig, University of Kaiserslautern, Germany.. Tobias Hercke, Daimler AG, Stuttgart, Germany.. 09:30 Contact and Contactless Investigations of Manufactured High-Precise Surface Structures.. (680).. Durakbasa, Vienna University of Technology, Austria.. Osanna, Vienna University of Technology, Austria.. Yurci, Yildiz Technical University, Material Science and Manufacturing Technology, Turkey.. Aksoy, Vienna University of Technology, Austria.. TC21 Oral Session 4 Friday, 08:30 to 09:50 – Pedro Álvares Cabral Room.. TC21 – Measurement Software, Validation.. Co-Chairs: Franco Pavese, INRIM, Italy.. Alistair Forbes, National Physical Laboratory, United Kingdom.. 08:30 Design and Evaluation of Experiments with SAS.. (247).. Adriana Hornikova, University of Economics in Bratislava, Slovakia.. 08:50 An Internationally Harmonised Measurement Software Guide: The Need and the Concept.. (419).. Norbert Greif, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Graeme Parkin, National Physical Laboratory, United Kingdom.. 09:10 Laboratories Best Measurement Capability Validation.. (598).. TC23 Friday, 08:30 to 09:50 – Fernão de Magalhães Room.. TC23 – Meeting.. Metrology in Food and Nutrition.. TC23.. Friday, 11:00 to 12:20 – Infante D.. Round Table on Higher Education in 21.. st.. Century.. TC4 Oral Session 13 Friday, 11:00 to 12:20 – Vasco da Gama Room.. TC4 – Direct Current and Low Frequency Measurements.. Co-Chairs: Ramon Pallàs-Areny, Universitat Politecnica de Catalunya, Spain.. Janusz Smulko, Gdańsk University of Technology, Poland.. 11:00 A New Method for Insulation Resistance Measurement at Low Voltage Level Using Change of Effective Resistance.. (47).. Kyu-Tae Kim, KRISS, Korea.. Kwang-Min Yu, KRISS, Korea.. 11:20 Assessment of Synchronic Detection at Low Frequencies Through DSP-Based Board and PC Sound Card.. (291).. Mateusz Kotarski, Gdańsk University of Technology, Poland.. 11:40 Parameters Estimation for a Model of Photovoltaic Panels.. (622).. Di Nisio, Department of Electrics and Electronics - Polytechnic of Bari, Italy.. Lanzolla, Department of Electrics and Electronics - Polytechnic of Bari, Italy.. 12:00 A Link Between Traditional and Modern Techniques in the Measurement of AC Voltage.. (142).. Umberto Pogliano, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Gian Carlo Bosco, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. Marco Lanzillotti, Istituto Nazionale di Ricerca Metrologica (INRIM), Italy.. TC8 Oral Session 1 Friday, 11:00 to 12:20 – Bartolomeu Dias Room.. TC8 – Uncertainty and Statistical Analysis.. 11:00 Validity of Polynomials as Results for Comparisons.. (281).. José Ángel Robles, Spanish Metrology Centre (CEM), Spain.. Javier Castro, Universidad Complutense, Spain.. 11:20 Choice of the Meaurement Points for a Calibration in a Range.. (349).. 11:40 Type A Evaluation of Uncertainty Due to Systematic Effects in Digital Oscilloscopes.. (343).. 12:00 Methodology to Evaluate Calibrations: A Study Case Study on the Interlaboratorial Comparison Program.. (217).. Joel de Jesus Lima Sousa, Companhia Hidroeletrica do São Francisco (CHESF), Brazil.. Luiz Torres Sá Leitão, Companhia Hidroeletrica do São Francisco (CHESF), Brazil.. TC21 Oral Session 5 Friday, 11:00 to 12:20 – Pedro Álvares Cabral Room.. TC21 – Measurement Applications.. Co-Chairs: Jean-Marc Linares, Aix-Marseille University, France.. Raghu Kacker, NIST/ITL/MCSD, United States of America.. 11:00 Uncertainty of Reference Frames Applied to Computer Aided Orthopedic Surgery.. (94).. Jean-Marc Linares, ISM/GIBO/EA(MS), UMR6233, Aix Marseille University, France.. Jean-Michel Sprauel, ISM/GIBO/EA(MS), UMR6233, Aix Marseille University, France.. Bernard Schlatterer, Institut des Sports de Monaco, Monaco.. 11:20 Impact of Model Uncertainties to the Reconstruction of Surface Profiles in Scatterometry.. (171).. Hermann Gross, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Andreas Rathsfeld, Weierstrass Institute for Applied Analysis and Stochasitcs, Berlin, Germany.. Frank Scholze, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Markus Bär, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 11:40 Comparison of Error Mapping Techniques for Coordinate Measuring Machines Using the Plate Method and Laser Tracer Technique.. (565).. Moustafa, National Institute for Standards, Egypt.. Gerwien, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Haertig, Physikalisch-Technische Bundesanstalt (PTB), Germany.. Wendt, Physikalisch-Technische Bundesanstalt (PTB), Germany.. 12:00 Approximate GCD of Inexact Univariate Polynomials.. (279).. Pablo Lecumberri, Universidad Pública de Navarra, Spain.. Marisol Gómez, Universidad Pública de Navarra, Spain.. TC23 Oral Session 1 Friday, 11:00 to 12:20 – Fernão de Magalhães Room.. TC23 – Food and Nutritional Metrology - 1.. 11:00 Comparison of Principal Component Regression (PCR) and Partial Least Square (PLS) Methods in Prediction of Raw Milk Composition by VIS-NIR Spectrometry.. Application to Development of on-Line Sensors for Fat, Protein and Lactose Contents.. (229).. Carlos Enrique Carleos, University of Oviedo, Spain.. Norberto Corral, University of Oviedo, Spain.. Jesús Angel Baro, University of Valladolid, Spain.. 11:20 A Flexible Experimental Set-Up for Development of Spectrophotometric Analysers of Food.. (59).. 11:40 Impedance Spectrometry for Monitoring Alcoholic Fermentation Kinetics Under Wine-Making Industrial Conditions.. (228).. Beatriz Garcia, University of Oviedo, Spain.. Raúl Crespo, Dept.. de Ingeniería Agroforestal (University of Valladolid), Spain.. Luis M.. Cárcel, Dept.. 12:00 Experiences in Measuring Density by Fiber Optic Sensors in the Grape Juice Fermentation Process.. (578).. Camilo Quintáns Graña, Vigo University, Electronic Technology Department, Spain.. Jorge Marcos Acevedo, Vigo University, Electronic Technology Department, Spain.. Ana Maria Cao y Paz, Vigo University, Electronic Technology Department, Spain.. María José Graña Caneiro, Xunta de Galicia, Estación de Viticultura y Enología de Ribadumia, Spain.. TC24 Friday, 11:00 to 12:20 – Fernão Mendes Pinto Room.. TC24 – Meeting.. Chemical Measurements.. TC24.. Friday, 13:40 to 15:40 – Pedro Álvares Cabral Room.. Workshop on Measuring the Impossible: Measurement of Characteristics Related to Human Perception and Interpretation.. Co-Chairs: Giovanni Rossi, Università degli Studi di Genova - DIMEC, Italy.. 13:40 Measurement Related to Human Perception and Interpretation – State of the Art and Challenges.. (486).. Birgitta Berglund, Dep.. of Psychology, Univ.. of Stockholm/Inst.. of Environmental Medicine, Karolinska Inst.. , Sweden.. 14:00 Measurement of Parameters to Value Human Life Extension.. (178).. Philip Thomas, City University, United Kingdom.. Roger Jones, City University, United Kingdom.. James Kearns, City University, United Kingdom.. 14:20 Estimation of Relatively Commanded Force from EMG and Its Appication to Human-Machine Interfaces.. (106).. Masato Watanabe, Tokyo Institute of Technology, Japan.. Yasuhiro Yamamoto, University of Tokyo, Japan.. Kumiyo Nakakoji, University of Tokyo, Japan.. 14:40 Customer Satisfaction Surveys: A Simplified Method to Create a Leverage Index using Qualitative Data.. (316).. Jean-Claude Krynicki, Agilent Technologies, Palaiseau, France.. 15:00 Multiparametric Measurements of Emotions.. (667).. TC3 Friday, 13:40 to 15:40 – Fernão Mendes Pinto Room.. TC3 – Meeting.. Measurement of Force, Mass and Torque.. TC8 Oral Session 2 Friday, 13:40 to 15:40 – Bartolomeu Dias Room.. TC8 – Calibration and Metrological Characterization.. Michela Sega, Istituto Nazionale di Ricerca Metrologica - INRIM, Italy.. 13:40 The Use of GC-MS to Support Stability Assessment of Density Reference Liquids.. (629).. 14:00 A New Procedure for Detecting Deviations Behind an Undercut by Using Optical Coordinate Measuring Machines.. (119).. 14:20 Traceability of 633 nm Laser Calibration at NIMT.. (158).. Monludee Ranusawud, National Institute of Metrology, Thailand.. Ketsaya Vacharanukul, National Institute of Metrology, Thailand.. 14:40 Study of Certified Reference Material Preparation Technique for Microelectronic Digital Circuits.. (88).. 15:00 A Semi-Automation Procedure for Dial Comparators Calibration.. (466).. Albert Garcia Benadí, Metrology and Calibration Lab.. Center in Vilanova i la Geltru, Univ of Catalonia, Spain.. 15:20 Absolute Calibration of Optical Flats Throgout the Self Comparison and Image Processing.. (30).. Jose Sánchez, Precision Engineering Laboratory, CCADET, Universidad Nacional Autónoma de México, Mexico.. Ruiz Gerardo, Instrumentation Measurement Department, CCADET, Univ.. Nacional Autónoma de México, Mexico.. Sergio Padilla, Precision Engineering Laboratory, CCADET, Universidad Nacional Autónoma de México, Mexico.. Benjamin Valera, Precision Engineering Laboratory, CCADET, Universidad Nacional Autónoma de México, Mexico.. TC13 Oral Session 5 Friday, 13:40 to 15:40 – Luís Vaz de Camões Room.. TC13 – Biomedical Sensors.. Co-Chairs: Miguel Angel Perez, University of Oviedo, Spain.. Satu Kärki, Department of Automation Science and Engineering, Tampere University of Technology, Finland.. 13:40 Wireless Flex Sensor Belt Networks for Foetal Movement Monitoring in Low Risk Pregnancies.. (107).. Luís Borges, University of Beira Interior, Instituto de Telecomunicações-DEM, Portugal.. Norberto Barroca, Univ.. da Beira Interior, Inst.. de Telecomunicações, Dep.. de Engenharia Electromecânica, Portugal.. Fernando Velez, Univ.. António Lebres, Universidade da Beira Interior, Departamento de Física, Portugal.. 14:00 High Sensitivity Triaxial Magnetic Field Transducer, Based on the Phase Characteristics of the GMI Effect.. (223).. Eduardo Costa Silva, Post Graduation Program in Metrology / PUC-Rio, Brazil.. Luiz Gusmão, Electrical Engineering Department / PUC-Rio, Brazil.. Carlos Hall Barbosa, Post Graduate Program in Metrology / PUC-Rio, Brazil.. Elisabeth Costa Monteiro, Post Graduate Program in Metrology / PUC-Rio, Brazil.. 14:20 Humidity Control System in Newborn Incubator.. (292).. Enilson José Costa, Federal Center of Tecnological Education of Pernambuco, Recife – PE, Brazil.. João Bosco Silva, Universidade Federal da Paraíba - UFPB, Brazil.. Carlos Magno Cursino, Univ.. de Pernambuco e Centro Federal de Educação Tecnológica de Pernambuco, Brazil.. Cláudio Oliveira, Universidade Federal da Paraíba - UFPB, Brazil.. Bruno A.. Pereira, Federal University of Pernambuco, Brazil.. Roniere F.. Silva, Federal University of Campina Grande, Brazil.. 14:40 A PVDF Sensor with Printed Electrodes for Normal and Shear Stress Measurements on Sole.. (346).. Satu Kärki, Tampere University of Technology, Finland.. Miika Kiiski, Tampere University of Technology, Finland.. Matti Mäntysalo, Tampere University of Technology, Finland.. 15:00 Plantar Pressure Distribution Measurements: An Approach to Different Methods to Compute a Pressure Map.. (130).. Jukka Lekkala, Department of Automation Science and Engineering, Tampere University of Technology, Finland.. Tiina Kaistila, Physical and Rehabilitation Medicine Unit, Tampere University Hospital, Finland.. Heikki-Jussi Laine, Department of Orthopaedics and Traumatology, Tampere University Hospital, Finland.. Heikki Mäenpää, Department of Orthopaedics and Traumatology, Tampere University Hospital, Finland.. Hannu Kuokkanen, Department of Plastic Surgery, Tampere University Hospital, Finland.. 15:20 A New Low-Cost and Portable Elisa Reader by Using a Photodiode Matrix and Electroluminiscent (EL) Lamps.. (227).. TC14 Oral Session 6 Friday, 13:40 to 15:40 – Vasco da Gama Room.. TC14 – Tactile Coordinate Metrology.. Co-Chairs: Gustavo Donatelli, Fundação CERTI, Brazil.. Vytautas Giníotis, Inst.. of Geodesy, Vilnius Gediminas Technical U-ty, Lithuania.. 13:40 Self-Calibration of 2D Planar Coordinate Measuring Machine.. (38).. Ryoshu Furutani, Tokyo Denki University, Japan.. 14:00 Reducing Dynamically-Induced Deviations for Line Scale Calibration in Non-Ideal Measurement Situation.. (272).. Saulius Kausinis, Kaunas University of Technology, Lithuania.. Algimantas Barakauskas Barakauskas, Precizika-Metrology, Lithuania.. Rimantas Barauskas, Kaunas University of Technology, Lithuania.. Aurimas Jakstas, Kaunas University of Technology, Lithuania.. Albinas Kasparaitis, Vilnius Gediminas Technical University, Lithuania.. 14:20 Matrix Method for LCMM — Connection Between Subspaces of Reference Points.. (433).. Jerzy Sładek, Cracow University of Technology, Poland.. Marcin Krawczyk, Cracow University of Technology, Poland.. 14:40 Knowledge-Based Optimisation of the Tactile Scanning Process on CMM.. (468).. Susanne Nisch, Laboratory for Machine Tools and Production Engineering WZL of RWTH Aachen Univ.. , Germany.. 15:00 Kinematic Metrological Model of the Coordinate Measuring Arm (MCMA).. (585).. Ksenia Ostrowska, Cracow University of Technology, Poland.. Kamila Gacek, Cracow University of Technology, Poland.. 15:20 Testing of the Repeatability of Stylus Change of Modular Probes Used in Coordinate Measuring Machines.. (656).. Adam Wozniak, Warsaw University of Technology, Institute of Metrology and Biomedical Engineering, Poland.. TC23 Oral Session 2 Friday, 13:40 to 15:40 – Fernão de Magalhães Room.. TC23 – Food and Nutritional Metrology - 2.. Co-Chairs: Isabel Castanheira, Instituto Nacional de Saude Dr.. 13:40 NIM’s Role in Developing National System of Metrology in Chemistry for Food Analysis.. (230).. Jun Wang, National Institute of Metrology, China.. Hongmei LI, National Institute of Metrology, China.. Liandi Ma, National Institute of Metrology, China.. 14:00 Development of a Certified Reference Material for Nicotinamide in Infant Formula.. (159).. Jun Liu, National Institute of Metrology, China.. Ting Huang, National Institute of Metrology, China.. Wei Zhang, National Institute of Metrology, China.. Yang Liu, National Institute of Metrology, China.. 14:20 Quality Control Materials for Analysis of Vitamins in Food.. (441).. Elsa Vasco, Instituto Nacional de Saude Dr.. Cristina Flores, Instituto Nacional de Saude Dr.. Inês Coelho, Instituto Nacional de Saude Dr.. 14:40 Determination of Organochlorine Pesticides in Tomato and Evaluation of Proficiency Testing Results.. (369).. Burcu Binici Gökçen, TUBITAK UME (National Metrology Institute), Turkey.. Fatma Akçadağ, TUBITAK UME (National Metrology Institute), Turkey..

    Original link path: /techprog.php
    Open archive

  • Title: IMEKO XIX World Congress, Lisbon, Portugal, 2009
    Descriptive info: Invited Talks.. 7th - 11:00 -12:00.. Tilo Pfeifer.. Terahertz based Imaging for Inspection and spectroscopic Analysis.. , born 1939, received his Dipl.. -Ing.. degree 1965 his Dr.. degree 1968 and his postdoctoral lecture qualification (Habilitation) 1972 form the RWTH Aachen University, Germany.. 1972 - 2004 he has been Professor and Director of WZL department “Metrology and Quality Management”, RWTH Aachen University and from 1980 - 2004 Director at the Fraunhofer-Institute of Production Technology IPT, Aachen.. He is now Professor Emeritus at RWTH Aachen University.. Still he teaches graduate courses in “Metrology for Microsystems” at several Universities (e.. RWTH Aachen University; Tsinghua University, Beijing; State University of Santa Catarina, Florianopolis, Brazil).. His research topics are Optical-/Laser-Metrology and Quality Management.. Prof.. Pfeifer received several awards e.. Distinguished Service Award of IMEKO 1985, degree of Honory Doctor form Universidade Federal Santa Catarina, Brazil, 1989 and from University of Zaragoza, Spain 2003, Degree of Honory Professor from Tsinghua University, Beijing 1995 and from Jilian University, Hangzhou, China 2006, Herward-Opitz Gold Medal of Honour from the VDI association, Germany 2004.. Since 1973 Prof.. Pfeifer is member of the General Council of IMEKO.. He is Academician of the International Academy of Quality (IAQ) and Academician of the International Academy of Production Engeneering(CIRP), member of the executive board of Federation for Quality (FQS), Germany and Chairman of the Scientific Council of the German Association for Quality (DGQ).. Pfeifer has published some 500 scientific papers, generally on laser-/optical measurement, coordinate measuring technology and quality management, numerous conference proceedings, several books and patents.. Presentation in PDF format.. 8th - 10:15 -11:00.. Andrew Wallard.. World Metrology - the next 10 years.. has been the Director of the Bureau International des Poids et Mesures in Sèvres, France since January 2004.. He was awarded a first class honours degree in physics from St Andrews University, Scotland in 1968, and a PhD in 1972.. He then worked as a laser physicist at the UK's National Physical Laboratory (NPL) until 1978.. After that, he spent 12 years in various central Government positions, including the Prime Minister's Cabinet Office, and the Department of Trade and Industry where he was a special advisor to various Ministers.. He has broad experience of science and technology policy and also managed several industrial programmes of research support which were operated by the UK Government and the European Community.. He specialised in University /industry collaboration.. He returned to the NPL in 1990 as Deputy Director and, subsequently, the NPL's Chief Metrologist.. From 2005, was a member of the International Committee for Weights and Measures(CIPM).. Professor Wallard was subsequently elected as the Director of the International Bureau of Weights and Measures (BIPM).. The  ...   and superhard materials, and has published some 90 papers in indexed international journals.. He is a member of the Brazilian Academy of Sciences, and Fellow of the TWAS (Academy of Sciences for the Developing World, Trieste, Italy).. He was awarded the Grand Cross of National Order of Scientific Merit, Brazil, the Aeronautic Order of Merit, the Order of Rio Branco, and the Award for Outstanding Researcher in the field of Physics and Astronomy, FAPERGS, 1998.. 10th - 10:15 -11:00.. John Webster.. Challenges in medical measurements.. John G.. Webster.. received the B.. degree from Cornell University, Ithaca, NY, USA in 1953, and the M.. and Ph.. D.. degrees from the University of Rochester, Rochester, NY, USA in 1965 and 1967, respectively.. He is Professor Emeritus of Biomedical Engineering at the University of Wisconsin-Madison, USA.. In the field of medical instrumentation he teaches undergraduate and graduate courses in bioinstrumentation and design.. He does research on improving electrodes for ablating liver to cure cancer.. He does research on safety of electromuscular incapacitating devices.. He does research on a miniature hot flash recorder.. He is the editor of the most-used text in biomedical engineering: Medical instrumentation: application and design, Fourth Edition New York, John Wiley Sons, 2009, and has developed 22 other books including the Encyclopedia of medical devices and instrumentation, Second Edition, New York: John Wiley Sons, 2006 and 200 research papers.. Dr.. Webster is a fellow of the Institute of Electrical and Electronics Engineers, Instrument Society of America, American Institute of Medical and Biological Engineering, and Institute of Physics.. He has been a member of the IEEE-EMBS Administrative Committee and the NIH Surgery and Bioengineering Study Section.. He is the recipient of the 2001 IEEE-EMBS Career Achievement Award.. 11th - 10:15 -11:00.. André Tavares.. Space Metrology – a Cosmic Vision.. André T.. Tavares.. , born in 1979 in Portugal, graduated in 2002 in Mechanical Engineering from.. Universidade Nova de Lisboa - Faculdade de Ciências e Tecnologia.. (UNL-FCT), Portugal.. Since then he has been working for the Testing Division of the European Space Research and Technology Centre (ESTEC), of the European Space Agency (ESA), in The Netherlands.. He began to perform mechanical design of Mechanical Ground Support Equipment for Testing in the ESTEC’s Engineering Services Section.. He is now the technical responsible of the Metrology Laboratory of the same section, providing support in measurement applications, from concept to execution, to the ESTEC Test Centre and labs and to ESA projects, such as Galileo, MetOp, Herschel-Planck, Automated Transfer Vehicle, GOCE, Lisa-Pathfinder, AlphaBus, among others.. He received an ESA Award Prize in 2006 for the alignment of the COROT Baffle, a space telescope successfully launched in end 2006..

    Original link path: /invited.php
    Open archive



  •  


    Archived pages: 20